0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the recommended way to approach a stack to place or retrieve a load in forklift?
Drive slowly forward,raise the forks to the required height, stop apply the parking brake
Are you supposed to leave the blades on a forklift up or down when parking a forklift?
Always down and on the floor.
Should you apply the parking brake when parking a forklift?
Yes, and set forks flat on ground
What is required when parking a forklift?
Drop the forks, apply parking brake, shut engine off, shut off propane tank,
Is there a substitute for hydrolic fluid on a forklift?
No, it must be the manufacturer recommended fluid.
Who is at fault when you backed out from your companys parking lot stopped when you saw a forklift is driving forward from your right hand side But the forklift hit your right rear bumper?
If you were backing out of a space and you stopped and the forklift had a REASONABLE amount of time to see your vehicle (about 3 seconds or so), then the forklift operator would be at fault.
How much air pressure should be in tires on a forklift?
The recommended pressure that is printed on every tire.
What should be done when shutting down the 50k rt forklift?
Put forks flat on ground, parking brake on, key out
What should you do first before leaving or parking your forklift?
Lower forks to flat on ground, remove key, put brake on.
Do you leave a forklift running while unattended?
No. Lower the load to the floor, set the parking brake, turn off the engine.
What do you have to have in order to drive a forklift?
Typically, forklifts feature two brake pedals: a service brake and a parking brake. When the forklift is moving, the service brake pedal is utilized to reduce speed or come to a complete stop. This brake uses the hydraulic system of the forklift to provide pressure to the brake shoes or pads, slowing or stopping the vehicle. The service brake pedal functions similarly to the brake pedal on an automobile and is typically situated to the left of the accelerator pedal. On the other side, the forklift is kept in place while it is parked by the parking brake pedal. The forklift is held stationary by this mechanical brake, which operates independently of the hydraulic system and makes use of a different set of brake shoes or pads. To aid prevent unintentional activation while driving, the parking brake pedal is often placed to the right of the accelerator pedal and is frequently distinguished by its vivid colour or distinctive form. Forklift operators can control each brake independently when the service and parking brakes are on different pedals, which can increase safety and lower the likelihood of accidents. The operator can use the parking brake to stop the forklift without mistakenly using the service brake, which could put extra strain on the brake shoes or pads.
What is the standard size of a parking space?
The standard recommended size of a parking space is 8.5 feet wide. However, parking spaces can be anywhere from 7.5 to 9 feet wide.
