Pulling a fuse will not clear codes on this vehicle. A scan tool is required to clear codes.
I use a scan tool.
The first two steps are check the fluid and check the computer for trouble codes.
You have to use a scan tool.
A scan tool is preferred.
You need to have the trans computer checked for trouble codes. The car will not shift out of 2nd when the system detects a problem and sets a code.
With a scan tool.
You first need to have it checked for codes, you then fix the cause of the code, you can then clear the code with a scan tool.
The airbag light stays on when the computer has detected a malfunction and set a code. The codes need checked with a scan tool to know possible causes.
You need to have the codes read. Once the cause of the code is repaired the light will clear itself.You need to have the codes read. Once the cause of the code is repaired the light will clear itself.
cycle the key 3 times to read the codes.. it should shut the light off.. but if you still have a problem it will still come back on. if that doesnt work go to autozone or discount auto parts.. they have a obd tool that can read and clear diagnostic codes.. but if you have a problem it might not be a good idea to ignore the light.
The system is finished displaying trouble codes in the odometer.
Have it checked for codes, That is the same as the check engine light.