Want this question answered?
The answer to this is , No! The extraction of metal usually requires the appliction of heat to separate the metal from it's matrix, the stuff mixed with the metal. This is called "Smelting". Each metal melts at a different temperature. Some of these temperatures are very high, so great care must be taken in this process.
Mercury is a metal that is liquid at room temperature. It is also poisonous.
The 200-400 mesh size is best for DNA extraction. The smaller sizes are usually used for metal ion extraction.
Reduction
Metal plating.
Isolation is the process of the seperation of the two metals but extraction is the process in which we get the desired metal from the concentrate.(in general we can say from the minerals and ores)
liberation itself refers to liberate , the process of separation of the metal and impurity from the compound of mineral is called liberation in mineral extraction
The answer to this is , No! The extraction of metal usually requires the appliction of heat to separate the metal from it's matrix, the stuff mixed with the metal. This is called "Smelting". Each metal melts at a different temperature. Some of these temperatures are very high, so great care must be taken in this process.
Metals are extracted from their ores which contain several impurities, the lighter impurities are removed by slag formation.
It is easier to obtain a metal from its oxide as compared to its sulphides and carbonates. So the metal sulphides & carbonates must be converted to metal oxides to ease the extraction
The most toxic 'metal' pollutant would be lead.Other pollutants present in the automobile exhaust are:HydrocarbonsNitrogen oxidesCarbon MonoxideCarbon Dioxide
Mercury is a metal that is liquid at room temperature. It is also poisonous.
all metal extraction is done from ores
The production of x rays is a reverse process of photoelectric effect. X rays are produced when target metal is bombarded by electrons while in photoelectric effect, the electron are produced when light waves are incident on a metal surface.
Extraction of pure metal from ores. That's all on my side.
It's used as a reducing agent. The carbon (or specifically the Carbon Monoxide produced by the heat of the furnace) "grabs" the oxygen from the ore (an oxide) producing Carbon Dioxide and the metal. The combustion of the carbon also provides the heat required for the extraction. If the ore is not an oxide, another method of extraction needs to be used.
No,The production of x rays is a reverse process of photoelectric effect. X rays are produced when target metal is bombarded by electrons while in photoelectric effect, the electron are produced when light waves are incident on a metal surface.