the safest position for a switch is on the live wire and not on the neutral wire
If an appliance does not work at all when you plug it in and turn the switch on the appliance circuit is not on.
Yes. Simply turn on the ceiling fan while the light switch is in the "on" position. Adjust the spinning to the level of your choice. Now the fan will turn on and off when you switch the light on and off.
A switch is useful to a table lamp because it allows you to easily turn the lamp on and off without having to unplug it from the power source. It provides a convenient way to control the lighting in a room, allowing you to adjust the brightness or create ambiance as needed.
This statement is correct.
I know for my grand am, I have to leave my key in the ignition for 15 minutes.
If an appliance does not work at all when you plug it in and turn the switch on the appliance circuit is not on.
The appliance's circuit is open.
Yes, the ignition switch must be in the ignition position -not- the accessory position.
1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.
Ignition switch lock cylinder
Unlock the drivers door with the key or insert the key into the ignition switch and turn the switch to the on position will turn off the alarm.
remove the wipers, turn on wiper switch, turn off switch, reinstall wipers @ bottom position torque nuts enough to secure the arm. turn on switch readjust as needed.
In the off position push the switch in and turn to parking lights position, then just pull out. John
Ur life suck that why
You either turn it on or off. Whenever you have children in the truck with you, turn the switch to the off position.
Check the position of your turn indicator switch. If it is in the left turn position, is the left lamp illuminated? Many European vehicles use this feature to illuminate the outside corner during parking. If the lamp is illuminated regardless of switch position, the fault most likely lies in the switch.
No. I have a compaq and when the computer is turned on, the wireless will turn on no matter what position the on/off switch is in. If you want to turn it off, you must turn the switch to the on position, and then back to the off position.