I need help
thdgh
By 'switching on an electrical appliance' we are completing (closing) the electrical circuit, allowing electricity to flow and the device to work.
A switch is a means of making (on) or breaking (off) an electrical circuit.
Superconductors are materials that offer no electrical resistance whatsoever but the highest temperature any known superconductor can be while retaining its conductive properties is -181 degrees Celsius, making them an extremely impractical and expensive material for most purposes. As far as I know the most conductive material at room temperature is pure silver, which is slightly more conductive then pure copper and 50% more conductive then pure gold. Copper and gold are both used commonly for conduction however because copper is much cheaper then silver and nearly as conductive, and gold is more resistant to corrosion then either silver or copper despite its reduced capacity for electrical conduction.
Copper is the best conductor of any metal except for silver. Silver is too expensive for normal use.
aluminium is used for making electrical cables as the metal do not melt easily
By 'switching on an electrical appliance' we are completing (closing) the electrical circuit, allowing electricity to flow and the device to work.
When making an electrical connection on a stove, you should use a circuit breaker.
copper is used in many ways, primarily for making electrical connections between all the electrical components and the motherboard
copper is used in many ways, primarily for making electrical connections between all the electrical components and the motherboard
Electrolysis extraction from Copper Ore.PS: Answer may be incorrect.
tungsten or sometimes copper
Metals conduct electricity which makes it great for making wires for circuits, metal is also used in copper tracks for PCBs(Printed Circuit Board).
mostly copper and aluminum
for making plumbing pipes and electrical wire among other things.
No acid is used.In the subtractive process for making PC boards, one of two etchant salt solutions will be used to remove copper from where traces are not desired:ferric chlorideammonium persulfateIn the additive process for making PC boards, copper will be added where traces are desired by electroplating from a copper sulfate salt solution.
Copper. The main grade of copper used for electrical applications is electrolytic-tough pitch (ETP) copper (CW004A or ASTM designation C11040). This copper is at least 99.90% pure.
A switch is a means of making (on) or breaking (off) an electrical circuit.