wood because it would keep it up for long
by miss one directio
Frabic
Frabic
The best would be to replace the whole frame with an aluminium frame, may be expensive but the frame will most probably outlive the building!!!!
== == === === === === === === === ===
If you are looking for good quality and durable shutter the best material to look for is Alcoa vinyl.
The best way to detect blood is with a very strong black light. Holding the light over a window frame will expose any bodily fluids, but it may not be possible to tell exactly what it is.
When replacing a window, be sure to take measurements carefully. Make sure the new window obtained will fit in the existing frame. It is best if there is a professional to replace the window.
Fabric is the usual material used for window shades because it has good durability for their purpose.
Cleaning a photo frame is largely a construct of what kind of material the frame is constructed of. Wooden frames are cleaned best with polish like Olde English or Pledge.
If the window frame and casing is made of wood and the temperature is hot with humidity it will swell and therefore the window will stick. Your best choice is wait for the humidity to decrease and your window will slide up and down fine. Otherwise you will have to shave a little offthe sides of the casing or frame.
I have replaced my drivers rear slider window on two occations. you need to first find a window from a wrecking yard and then there are screws and bolts around the frame. Take these out and then gently pry around the frame where you will find some black soft tar-like stuff that weatherproofs the window. Keep prying gently. Be careful or you will break the new window. eventually the window will come away from the frame. You will need to purchase the black weatherstriping gook that comes as a roll. Clean the new window if it is used of all the old sealant with a razor blade or chisel gently. and put a caulking bead around the frame before installing it in the new frame. That is the best I can tell you.
You should measure the inside of the window frame as well as the outside, take these measurements to the store and they will make sure you get the right fit.
Rather than soundproofing the window after the fact, windows are made of soundproof material. You can get information about that here: http://www.soundproofwindows.com/