Which network topology requires multiple input output ports to enable it to connect directly to all other devices?
A Mesh Topology
Well, it depends on the topology you choose to connect computers. Topology is the way used to connect computers. If you choose bus topology then you need a cooper wire (main line) for transmitting the network signals, and you need some taps and some drop lines(wires) for connecting your computers to the main line. And if you choose star topology then you need a hub or a switch to connect sevral computers. You can also…
Ring topology is a setup in which the systems are connected to their adjacent systems directly....if a system wants to connect / communicate with a farther system....it sends the data through the different systems on the path, so, there is very less security of data and encryption algorithms are the only way to protect the data
Network Topology refers to the way that cables and other pieces of hardware connect to one another. There are four common "base" types of topologies: bus, ring, star, and mesh. There are other types as well, but these are referred to as "hybrid topologies." The most commonly used network topology is a hybrid topology called the Star Bus Topology.
A modem is a device that allows a single computer to connect to the internet, it requires a username and password to connect usually. A router connects multiple computers and is always connected. It does NOT require a username or password to connect to the internet. Routers can also be wireless, whereas modems can not.
Even the smallest LAN technically has a backbone, which could be any of the 4 basic topology types. Any time you need to connect various routers, switches, etc., together you connect them via a backbone cable. A backbone may have its own topology as well,such as a serial bus, parallel, distributed, or collapsed backbone. These topologies do not exactly mirror topologies for a LAN or a WAN.
Advantages of a Tree Topology Point-to-point wiring for individual segments. Supported by several hardware and software venders. Disadvantages of a Tree Topology Overall length of each segment is limited by the type of cabling used. If the backbone line breaks, the entire segment goes down. More difficult to configure and wire than other topologies. Advantages of a Linear Bus Topology Easy to connect a computer or peripheral to a linear bus. Requires less cable length…
A Server Depends on the network topology (design). Is the topology a token-ring, star, bus, etc? Server is usually the correct answer in general, but you also have switches, routers, and on older networks, hubs. Some old networks didn't use servers at all. All of the computers combined made up the "server" so to speak as they were all directly linked to one another such as in a bus topology. The problem with bus is…
The bus topology is one of the four main topology types for networking. It allows systems to be connected in a straight line without any other network connectivity devices. As a result, it is easy to construct and needs very little in the way of configuration, and is inexpensive compared to other topologies. The main result of any topology is to connect clients together in order to share resources.
The basic difference between the microprocessor and microcontroller is that we can interface a microcontroller directly means "for example we can directly connect a keyboard to microcontroller to any of its ports"....where as for microprocessor we can't interface directly...we require a circuit board since it requires ram,ic's.....etc.,! beyrojac mahinay
when we decide to form a network such a shortest path have to establish for data transmitting,different type of topology we have to use. for eg:-if i hav one server or hub or a switch(one centralize device)and 15 clients to connect ,then there are various ways to connect them according to our need... topologies are of type: !)star-when we need all the terminal attched to one central decice 2)ring-whn we need all terminals connect to…
Most commonly, a computer modem is a device that gives you internet from your Internet Service Provider (ISP). They usually connect to your phone, cable, or dish line to send and receive data. To get internet, you then connect your computer to the modem directly or you connect to a device called a router (share internet with multiple devices) in which connects to the modem.
There are several advantages to a mesh network topology. First, it is fault tolerant; since there is no gateway, nodes can connect to each other with no regard to the state of the rest of the network. In addition, nodes can create their own paths through the network because there is no gateway computer. One disadvantage to a mesh topology is that setup time can be quite time consuming.
Why are there are many insulated copper wires instead of a single long wire in electrical appliances?
Local Area Network Cable usually associate with a bus topology network. In a Bus topology network simple LAN cables are used with LAN Hubs ( i.e. having a collection of LAN ports ) which in turn connect many systems with the server systems. LAN cables are available in various length ranging from 1meter onwards.
Depends on which topology you are used i.e Ring, Bus, Mesh or Star. Like in Ring topology each node is connected to 2 nodes on either side and is suitable for small network. In Star topology there is a central node to which all other nodes are connected, data is transferred from source node to central hub and then to destination node. In Bus topology one long cable act as a back bone to link…