0
What else can I help you with?
Can i connect multiple computers into a supercomputer?
Linking multiple computers together is known as a Computer Cluster. Look that up and you should have your answer.
How you can connect several computer by networking?
Depends on which topology you are used i.e Ring, Bus, Mesh or Star. Like in Ring topology each node is connected to 2 nodes on either side and is suitable for small network. In Star topology there is a central node to which all other nodes are connected, data is transferred from source node to central hub and then to destination node. In Bus topology one long cable act as a back bone to link all the devices and is reliable from hardware point of view.
What network device connects multiple newtorks that use the same protocols?
The network device that connect multiple networks that use the same protocol is a ROUTER.
What type of cable do I use to connect directly to another computer over a switch?
You need a crossover cable for that.
Two ways of connecting to the internet?
1. Dial-up - You use a dial-up modem in your computer to connect to the internet over a phone line. 2. Ethernet - You connect to a cable / DSL modem with an Ethernet cable, either directly to the modem or through a router. 3. Wi-fi - You connect to a cable / DSL modem with a wireless card to a router, which is connected to the modem. 4. USB - you connect to a cable / DSL modem directly with a USB cable. 5. 3G - A form of wireless internet that communicates using cellphone towers.
Why bus topology cost is very less?
Bus topology, as compared to a star topology costs less because less cabling is required to connect multiple devices together.
What type of network topology typically requires that the host connect through a t connector?
bus
What type of network topology typically requires that the host connect through a T-connector?
bus
What a star topology uses a to connect all of the nodes?
A star topology uses a central network device, such as a hub or a switch, to connect all nodes in the network. Each node is connected directly to the central device, creating a centralized architecture that simplifies network management and troubleshooting.
How does star topology connect to other topology by switch hub and router how does star topology connect with other topology with such router and hubs?
In a star topology, all devices are connected to a central hub or switch, which manages data traffic between them. When integrating with other topologies, such as bus or ring, a router can be used to connect different network segments, allowing communication across diverse network structures. The central hub or switch facilitates easy management and troubleshooting, while the router enables data routing between multiple topologies, ensuring seamless connectivity. This setup enhances network flexibility and scalability.
What topology is the least expensive to build?
The least expensive topology to build is typically the bus topology. This design requires only a single central cable, or "bus," to connect all devices in the network, minimizing the amount of cabling needed. Additionally, it is relatively easy to set up and requires fewer networking devices, such as switches or routers, compared to more complex topologies like star or mesh. However, bus topology can be less reliable and harder to troubleshoot as the network grows.
How many cables are needed to connect 5 devices in a mesh topology?
In a mesh topology, each device is directly connected to every other device. To determine the number of cables needed to connect 5 devices, you can use the formula ( n(n-1)/2 ), where ( n ) is the number of devices. For 5 devices, this results in ( 5(5-1)/2 = 10 ) cables. Thus, 10 cables are needed to connect 5 devices in a full mesh topology.
What three topologies is the PSTN based on?
The Public Switched Telephone Network (PSTN) is primarily based on three topologies: the star topology, the ring topology, and the mesh topology. In a star topology, all devices connect to a central hub or switch, facilitating straightforward communication. The ring topology connects devices in a circular fashion, allowing data to pass in one direction, while the mesh topology offers multiple pathways between nodes for redundancy and reliability. Each topology serves distinct purposes in the overall structure of the PSTN.
Which topology is suitable for connect 12-15 PC in a network with low cost and good security?
star topology
Explain the following network topologies Bus Star Ring and Mesh You can draw figure to explain?
a topology is a way to connect the network system. we can connect network with different types ring ,bus and mash is a topology or way to show connect network with different types in ring topology the systems which we want to connect in network in the form of ring
Who invented ring topology?
the inventor of star topology is Sean Ross Remigio that connect the pc to stars.
What logical topology is used in a classroom?
Most classrooms rely on a star topology to connect their systems together.
