0
What else can I help you with?
What is a straight cable?
In ethernet terms, a straight-through cable connects a client device to a hub, switch or router (straight-through meaning the connection is pin-to-pin, the opposite of a cross-over cable, which connects RX-TX and vice-versa).
What is the difference in Ethernet crossover and patch network?
tpatch cable is also known as straight cable and mostly connected same devices or nodes. but on the other side cross cable is just different then patch and used to connect different devices. Hem Gurjar
Can you connect a cable modem to a 2Wire DSL wireless modemrouter?
Yes you can, you have to do that like following. Connect one DSL wireless modemrouter to the cable modem, and another wireless modem connect in the first wireless modemrouter. You have to understand that internet speed on the first DSL router will be rather higher then for the second one.
I currently have a Mac pro and want another one. Is it possible to connect both together to form the one overall system?
You can connect them using a firewire cable and target disk mode. Turn on one of them and connect the two with the cable. Turn on the second one while holding down the "T" key for "Target Disk Mode". This will make the second one appear as an extrnal drive.
Can you connect two computers to one monitor without using a switch?
I believe that it is possible to connect to computers to one monitor. I have worked with brand new LCD monitors with two inputs - one DVI and one VGA. The monitor auto-senses which port is being used. So in theory, use the auto detect button on the front of the LCD panel to switch between computers.
How you can connect switch with fiber optic cable?
I will explain to you properly how you can connect the switch with a fibre optic cable. The ethernet switch provides the all network connection to the fibre optic cable so the ethernet cable plugs into one of the output ethernet ports on the switch provided by the fibre network.
I have a mac pro and want another one. Is it possible to link both together to form the one overall system?
You can connect them using a firewire cable and target disk mode. Turn on one of them and connect the two with the cable. Turn on the second one while holding down the "T" key for "Target Disk Mode". This will make the second one appear as an extrnal drive.
How many floppy drives can connect to one floppy drive cable inside a computer case?
Normally a floppy drive interface can be used to connect two floppy disk drives. However this may vary from system to system, some systems may also have two interfaces. It may be necessary to purchase a floppy drive cable with two connection headers.
What does solenoid look like for 1998 ford explorer?
Starter solenoid? Follow the + battery cable will connect to starter solenoid One large cable from battery One large cable to starter One small "trigger" wire located in middle of other 2 cables Usually mounted to the inner fender
How do you connect Xbox 360 on dell computer to Xbox live?
You need something called a router. I am not sure if you can just connect the ethernet cable into the computer. If you have a WIRELESS router, you can buy the wireless adaptor for about $100 dollars (new) snd $70 (used). Or you can use the ethernet cable it comes with. The ethernet cable that it comes with is very short (probably 3 1/2 feet long). I got my longer ethernet cable for free, and my free one is about 20 feet long. Wow! All Xbox 360's, besides the Arcade, come with one free month of the Gold Membership. Hope this helped -Joe
Can you battle online with an emulated ROM of Pokemon emerald?
No, you can't. Emerald was one of the GBA editions of pokemon and needed a cable to connect other GBA's to it.
What is a cable router?
A router is a device that acts as connection between two different networks. In this case, the cable company has one network, which includes your Internet Connection. The network is your home computer or computers. The cable router allows these two networks to connect with each other and share information.
