answersLogoWhite

0

The insulators which are made of ceramic uses corn in the production of said ceramic. Amazing

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you check spark plug in lawn mower?

You pull the ruber boot off the top of the spark plug , take the plug out, put boot back on the plug, touch steel part of the plug to steel on motor,pull motor over while watching the gap on the plug if you see spark it should be ok if no spark do the same with a spark plug you know is good to make sure it is the plug. Hope this helps


What is the spark plug replacement for kawasaki mule 610?

NGK spark plug part number BPR5ES


What spark plug for toro ccr1000 snowthrower?

Tecumseh Part #611049 - Champion Spark Plug #RCJ8Y


What is the correct spark plug for John Deere JS45A?

correct part for js45a spark plug and filter


Is a spark plug part of a ignition?

yes


What is the hottest part of the spark plug?

Coul


Which spark plug is for Cr 125 2000?

Spark plug BR9EG part # 98079-59679 usually about $5.00


Is a spark plug a part of the ignition system?

YES! the spark plug ignites the fuel mixture and causes combustion


Is spark plug wire part of the ignition system?

YES! the spark plug ignites the fuel mixture and causes combustion.


What could be wrong if your snowblower will not start?

Unscrew the spark plug, connect the spark plug wire to it, and rest the spark plug on something metal (you might have to use a metal screw driver to link the spark plug to a metal part on your blower). Then yank the starter cord and make sure the spark plug produces spark. If it does not, replace spark plug. Make sure there is Fresh fuel in the fuel tank - old fuel may lose its combustive properties. Make sure there is fresh oil in the engine. If the fuel is old, it will get in the way of your motor turning making it hard to start. Check to make sure air filter is not dirty. If it is, replace it. Finally, the problem could be with a carburetor. You might have to clean it out.


Which part is not used in diesel engine?

spark plug


What should always be removed when working on a lawnmower?

Remove the spark plug wire from the spark plug and make sure it will not touch the spark plug. Or, you can remove the spark plug, but be sure and cover the hole so no debris will fall into the cylinder.