0
What else can I help you with?
What is a blade connector?
A blade connector is a type of single-wire connection using a flat blade which is inserted into a blade receptacle.
What is a serial connector?
Serial connector term is used for an interface connector on which the protocol of data transfer is serial type. Serial data transfer means one electrical connection or signal for data transfer (one bit at a time from transmitter to receiver) at specific speed (bits per second). Note that on the connector actually there may be more than one electrical connections for signals other than serial data, which include clock and power in some cases, or control signals. Serial data itself may be electrically sent in differential form in which case serial data itself needs two wires (positive and negative). Common examples of serial connectors include serial port (RS232) and USB.
Identify the connector that can be used to connect RG6 cables?
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
What are the differences between sc and st fiber optical connector?
ST is round metallic connector rather SC is square plastic connector. ST and SC connector are two types of fiber optic connectors. For 10Base-F connection, the connector is usually ST type ;For 100Base-FX usually IS SC type connector. The core of the ST connector exposed and the SC'core is inside of the connector
What type of broadband connection is referred to as CATV?
fiber-optic cabling it is. usually coax 'f' connector
What type of connector is used to connect hubs and switches?
Nowadays, a USB cable connection is commonly used.
What does TV out mean?
Normally, a connector marked as TV out is an output that carries video and audio signals for connection to another device. The connector type can vary but it is likely to be three RCA connectors or an HDMI connector.
Where on computer do you hook up mouse?
That depends on whether the mose has a USB or PS2 connection on it. If it has a USB connection the connector and port for it are as displayed here: If it has a ps2 connection the connector and port are displayed here: If it is this type then you would plug it into the green ps2 port as the purple port is for a keyboard
What is the definition of the word 'bulgin'?
Bulgin is a type and manufacturer of connector plugs. It is used on non-standard connection types such as the small, three pin connector plugs. It is for uncommon connections.
Why usb is called universal serial bus?
Because it is universal, meaning that it was developed to allow all kinds of hardware devices to connect to a computer with the same connection. With the USB all computer manufactures and hardware manufactures use the exact same type connection rather than them all using their own type connector. This allows you to buy any mouse from any manufacture and it will then connect to any computer no matter who made it. It is universal.
What are the differences between using a push-in connector and a wire nut for connecting electrical wires?
A push-in connector is a type of electrical connector that allows wires to be inserted and secured by pushing them into the connector. A wire nut, on the other hand, is a twist-on connector that requires twisting the wires together and then securing them with the nut. The main difference is in the method of connection: push-in connectors are quicker and easier to use, while wire nuts provide a more secure and reliable connection.
What type of power connector is L- shaped?
An L-shaped power connector typically refers to the C5 connector, also known as the "cloverleaf" or "Mickey Mouse" connector. This connector is commonly used for powering laptops and certain electronic devices. Its distinctive L-shape helps ensure that the connection is secure and minimizes the risk of accidental disconnection.
