0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which component controls the opening and closing of the valves in an engine?
A cam shaft generally open and closes the valves. This is a driven component by a belt or chain to the crank shaft.
Which componant control the opening and closing of the valve in an engine?
A cam shaft generally open and closes the valves. This is a driven component by a belt or chain to the crank shaft.
What are valve lifters?
Your car has a cam-shaft that controls the positioning of the cylinder valves. It MAY contact the valves directly, but in most cars they are not close together. To transmit the action of the cams to the valves they might have used rocker arms and lengths of metal. Those lengths of metal are called lifters. An improved version uses a tube filled with oil and are called hydraulic lifters.
Where and what is the camshaft position sensor?
the camshaft position sensor is used to synchronize the fuel injection system with the opening of the intake valves. It synchs the cam shaft location with the crankshaft location It can be in a distributor or it can read a tone wheel on the cam shaft.
Will a broken timing belt cause engine damage on 1999 geo tracker 4 cylinders?
In short, yes. The timing belt turn the cam-shaft which controls the timing of the opening and closing of the valves in the cylinder head. When a timing belt/chain breaks (usually at high RPM) valves can remain open where they can come in contact with the pistons and be bent by the pistons that are still moving with great force at high speed. Simply replacing the timing belt will not fix the engine if the valves are bent. You can get the valve train re-machined, but an easier (though not cheap) fix is to replace the whole cylinder head.
How do you adjust headlights on ford escort 1997?
There are 2 controls for each headlight. The outer control hex shaft (4mm) controls the up and down function and the inter hex shaft controls the side to side function. It is hard to find the portion you turn on the back of the headlight assembly. The inner shaft is about in the middle and not hard to find. The outer shaft is hidden by the top of the brace and is hard to find.
What is the outrageous opening scene to Bruno?
its his genitals floping around then his penis shaft opening and saying Bruno
How do you get the exhaust flaps out of a 2001 Cr125 cylinder?
You first need to remove the side cover at the top of the cylinder on the right side. Once this is removed you will expose the power valves and power valve actuator rod. You will need to remove a cotter pin that holds the actuator rod to the power valve shaft. You can then remove the power valve shaft. The power valves will come out through the exhaust port. It is best to have the cylinder head removed and expansion chamber removed for access. If the shaft wont pull out it is because of carbon build up. You will need to spray the shaft and valves with solvent. The shaft should pull out.
What is Purpose of the cam shaft?
to open and close the intake and exhaust valves in accordance with piston and crankshaft position
What is an exhaust camshaft?
The function of a camshaft is to open, and close the valves, to allow a fuel/air mixture into the cyclinder, where is it is processed into power. An engine has intake, which allow the mixture into the cylinder, and exhaust valves, which allow the spent mixture, as exhaust, out the tailpipe. An exhaust cam, would be, most likely, on a twin, or dual overhead cam, configuration, where one cam controls the intake valves, and one controls the exhaust. A cam is a shaft with eccentrics on it. These eccentrics have some sort of follower, depending upon the make, that rides along the came eccentric, and opens the valve, when the raised portion of the eccentric rotates around. The raised portion wears down, and becomes flat, thus no longer opening that particular valve, which causes the engine to run bad, which is a common problem, and judging by your question, maybe an issue in your life, currently.
What is steam turbine governor valve?
In large turbines, a valve controls steam flow to groups of nozzles. The number of open valves controls the number of nozzles in use according to the load. A bar-lift or cam arrangement operated by the governor opens and closes these valves in sequence. Such a device is a multi-port valve. Using nozzles at full steam pressure is more efficient than throttling the steam.
What are cam followers and what are they used for?
On some engines the cam-shaft does not directly operate the valves, but uses a lever (the Cam Follower) to transmit the force from the cam to the valve. Basically they are levers, and they are used to open the valves.
