The light must be off
Put it in a safe place. And clean it first
Remove your eyes from the eyepiece of the microscope.
Turn the microscope off
Remove the slide ,return the scope to low powered and ,turn off the light .
Remove the slide ,return the scope to low powered and ,turn off the light .
Remove the slide ,return the scope to low powered and ,turn off the light .
The two basic principles that are involved using the microscope are magnification and observation. They are both done by examining an object through the lens of the microscope.
You can't change the contrast on the microscope, that would have to be done using dyes.
Replace the missing part.
It will bring an object into focus..
you should make sure the microscope is clean and ready. and that it is set on the right setting. i actually have no clue . suckerrr
When done using a microscope, I first carefully clean the lenses with lens paper to remove any smudges or debris. Next, I lower the stage and return the objective lenses to their lowest position to protect them. Finally, I cover the microscope with a dust cover and store it in a safe place to ensure its longevity and readiness for future use.