it is under the cruise control servo on the front driver side engine bay. kindof a pain.
should be on drivers side of the firewall
I have an 88 Honda prelude and my computer is located under the carpet on the passenger side.
The starter on the 1989 Honda Prelude is located on the left side of the engine. It is under the radiator hose that is at the rear of the radiator.
AnswerIts located on the intake manifold somewhere It is located on the driver's side of the intake parallel of the brake master cylinder.
it is on passanger side floorboard on side of console
The first one on the driver side going from right to left.
It's located on the side of the intake manifold (driver's side) near the master cylinder reservoir. It's white & attached by 2 screws & has a 2 wire connector.
Should be under dash or on side of the center console.
it's on the left side under the alternator...
HorsepowerHeres the Honda engines hope you can find yours B20A (16-Valve, 4 Cylinder, DOHC, PGM-FI)Found in: Serial numbers 1000001~, 1500001~ and 1550001~ (Gold Valve Cover) 1985-1986 Honda Prelude Non-U.S. 1985-1986 Honda Accord Non-U.S. 1985-1986 Honda Vigor Non-U.S. Serial numbers 1600001~ and 1640001~ (Black Valve Cover) 1987-1989 Honda Accord Non-U.S. 1987-1989 Honda Vigor Non-U.S. Displacement: 1958 cc Compression: 9.4:1 Power: 160 hp @ 6300 rpm & 140 ft�lbf @ 5000 rpm Transmission: B2K5, F2K5B20A (16-Valve, 4 Cylinder, DOHC, PGM-FI)Found in: 1987-1990 Honda Prelude Japan Domestic Market This carries the same engine code as the original B20a above, but is actually a different engine. The serial number for these B20A will be: 5000001~B20A2 (16-Valve, DOHC, PGM-FI)Found in: 1986-1989 Honda Accord Non-U.S.B20A3 (12-valve, SOHC, dual side-draft carburetors)Found in: 1988-1991 Honda Prelude 2.0 S HorsePower: 104 @ 5800 (MT) 105 @ 5800 (AT) Torque: 111 @ 4000B20A4 (12-Valve, SOHC, dual side-draft carburetors)Found in: 1988-1991 Honda Prelude Non-U.S.B20A5 (16-valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude 2.0Si Power: 135 hp Engine cc: 1958.14 Cylinder cc: 489.535 Deck cc: 13.885 Head cc: 47.3 Compression Ratio: 9.0:1 engine using a pk-2 Honda ECU based on oki83c154 processor (Intel 8051 based with external ROM)B20A6 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. New Zealand, and Australian Domestic Market 140hp@6000rpm 170nm@5500rpm KY model is one of themB20A7 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. UK, France, Holland, Norway, South Africa Power 150 hp@6000 rpm Torque 180Nm@5500 rpm Compresion ratio 10.5:1B20A8 (16-Valve, DOHC, PGM-FI)Found in: 1988-1991 Honda Prelude Non-U.S. Russian, Swedish Domestic MarketB20A9 (16-Valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Non-U.S. Finland, German, Norway, Netherlands, Russia, Argentina Power 140 hp@6000 rpm Torque 175Nm@4500 rpm Compresion ratio 10.5:1B21A (16-valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Si States Very rare, it was only produced for the "Si States" models in Japan. There is an old myth that this engine produces 175+ HP, this is completely false.B21a:HP: 145 @ 5800 RPMTQ: 137 @ 5000B21A1 (16-valve, DOHC, PGM-FI)Found in: 1990-1991 Honda Prelude Si Power: 140 hp @5800 rpm Torque: 135 lb.ft @5000 rpm Engine cc: 2056.03 Cylinder cc: 514.0075 Deck cc: 10.191 Head cc: 51.0 Compression Ratio: 9.4:1 Torque (lb.ft. @ rpm): 135@5000
20 inches on the driver's side, 19 inches on the passenger side.
drivers side under dash mounted in fuse panel