Are any of them working on either side? If so turn on and off lights and turn on and off signals and press brake pedal to find the positions of the sockets on the working lights. For more information on bulbs, see sources and related links below.
Remove the socket from the rear of the fixture, remove faulty bulb from socket and replace with good bulb and replace socket in fixture. Fini!
bulb number for taillights are 2057 on a 1991 civic dx.
probably because there is a bad Ground-clean the socket where the bulb goes & coat w/vasoline & if there is metal on the socket housig ,clean that.That is IF U have 12 volts going 2 the socket-the tag light work with the running lights.
Short in the wiring or light bulb socket.
To effectively replace a LED Christmas bulb, first unplug the lights and locate the faulty bulb. Gently twist and remove the old bulb from its socket. Then, insert the new LED bulb into the empty socket and twist it securely in place. Finally, plug the lights back in to ensure the new bulb is working properly.
Open the trunk. Turn the socket counterclockwise and remove. Then gently pull out the light bulb. Place the new bulb in the socket and replace the socket into the lens by turning clockwise. Replacement light bulb #3652.
replace the lamp socket they short in a strange way, it happened to me 3x. the socket carbonized from bulb heat
If it's anything like my 92 bird, to replace the signal lights you just pull back the carpet in the trunk and twist the deal that holds the bulb then pull it out. What if the bulb has broken or shattered but is still installed in the socket??
The side marker on a 1996 Honda Civic is replace by lifting the hood and locating the light housing. Once found unplug the bulb. Remove the old bulb and insert the new unit.
the bulb could be blown or a bad connection. find out if there is a current al the way to the bulb socket.
could be the bulb is bad or the socket is corroded or the wiring to it is damaged.
In 1984 Corolla sedan and coupe the brake lights are mounted in the trunk lid. Just grip the socket and turn counter clockwise 1/4 turn and the bulb and socket will come out, grasp bulb and another 1/4 turn bulb will come out. Sylvania Part № 7443LL 2 filament bulb (same bulb is tail lights)