0
What else can I help you with?
What is the temperature at 10000 feet altitude?
-4.83 Celsius
Which type of nuclear burst occurs above 10000 feet surface level?
High-altitude burst
What type of nuclear detonation occurs above 10000 feet and generates a high energy electromagnE tic pulse?
High-altitude burst
What state hes the lowest altitude?
California is the state that contains the lowest point of elevation at Badwater Basin in Death Valley at 282 feet below sea level. Louisiana Ranks second with a point that is 8 feet below sea level. Delaware is the state with the lowest average elevation at 60 feet above sea level.
What is the altitude at the Colorado state capital?
It is 5,280 feet above sea level.
What state has more than 100 peaks that rise above 10000 feet?
Califronia has 100 mountain peaks and the tallest mountain goes over 10000 feet! hope it helps
What altitude is New York?
The State has an average elevation of 1,000 feet and the City an average of 33 feet above sea level.
How many feet are equivalent to 10000 feet?
The equivalent to 10,000 feet remains 10,000 feet.
How do you convert altimeter setting 30.12 pressure altitude?
First, determine the difference from standard pressure 29.92. 30.12 -29.92 --------- .20 If you drop the decimal point and add a zero you get the number of feet of difference, so .20 = 200 feet. Since 30.12 is a higher number than 29.92, you subtract it from the actual altitude. If the indicated altitude is 10000 feet, your pressure altitude is 9800 feet. If your altimeter setting is lower than 29.92 you add the difference. It can also be expressed as PA = IA + ((29.92 - AS) * 1000) where IA is indicated altitude and AS = altimeter setting.
Is 10000 inches greater than 1000 feet?
10000 inches is equal to 833.333 feet. Therefore, 10000 inches is less than 1000 feet.
Compare the altitude of Lynchburg VA to the altitude of Denver CO?
Denver is a mile high or as tall as a 528 story builiding if such a building could be constructed. Lycnchburg has an elevation of 630 feet or about the height of a 62 story building, By comparison, the Empire State building in New York City contains 102 stories and when measured to the roof it is 1,250 feet tall.
How do you convert altimeter setting 30.12 pressure?
First, determine the difference from standard pressure 29.92. 30.12 -29.92 --------- .20 If you drop the decimal point and add a zero you get the number of feet of difference, so .20 = 200 feet. Since 30.12 is a higher number than 29.92, you subtract it from the actual altitude. If the indicated altitude is 10000 feet, your pressure altitude is 9800 feet. If your altimeter setting is lower than 29.92 you add the difference. It can also be expressed as PA = IA + ((29.92 - AS) * 1000) where IA is indicated altitude and AS = altimeter setting.
