route redirection and protocol unreachable
ARP ICMP IRDP
Assuming IPv4 ICMP. Ping uses IP for transport. Ping in itself is an "Echo Request", which is a function of the ICMP protocol. The IP Packet will carry the ICMP protocol from end-to-end. ICMP has a protocol number of 1, so the "Protocol" field in the IPv4 header will contain "1" as a reference to the ICMP payload. For IPv6, ICMPv6 is used, and the transport will be IPv6.
Off the top of my head it is IPv4 IPv6 Appletalk IPX
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
There is no need to disable ipv4 to use ipv6.
1. Describe the main features that differentiate IPv6 from IPv4
IPv4 and IPv6 are two different protocols . The two protocols are not compatible with each other. But they can exist in a same network together.No, those are two different protocols. However, they can co-exist in the same network (this is known as "dual stack").No, those are two different protocols. However, they can co-exist in the same network (this is known as "dual stack").No, those are two different protocols. However, they can co-exist in the same network (this is known as "dual stack").No, those are two different protocols. However, they can co-exist in the same network (this is known as "dual stack").
I guess NAT64
While IPv6 is based on IPv4, it is superior. The main characteristic that shows its enhancement over IPv4 is that it processes faster.
In IPv4, the loopback address is 127.0.0.1. In IPv6 it is ::1.
There is no direct conversion.
uLol(^^,)!