0
Fiber optic, Twisted-pair
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Does CAT5 cables support 1Gbps?
No
Which advanced category of the unshielded twisted pair cable is used in the market today?
CAT5 or CAT6. CAT6 is becoming the standard because it is rated for 1Gbps and faster speeds.
Which speed in internet is faster 100mbps or 1gb?
Well, 1000Mbps equates to 1Gbps. So your answer is the 1Gbps, which is incredibly fast.
Types of Ethernet?
10baseT - 10Mbps 100BaseT - 100Mbps GigE - 1000Mbps or 1Gbps 10GigE - 10000Mbps or 10Gbps
What types of cable would you use to connect a pc NIC to an RJ45 Ethernet port of a Cisco router?
RJ-45 uses twisted part of different categories. The most common is CAT5E (100MHz, up to 1Gbps when all 4 pairs are used) and CAT6 (250MHz, native 1Gbps). There is a newer standard CAT6A that is even faster.
How does the speed of 802.11n compare to gigabit Ethernet?
802.11n is rated for a maximum bandwidth of 135Mbps and Gigabit Ethernet (as the name implies) is rated for 1Gbps (or 1000Mbps).
What is the solution to do change lan speed from 10mbps to 1gbps?
Network performance tweaking is based on a lot of factors and cannot be resolved by asking a one-line qts. in short, there are a lot of factors that would govern a speed change in your LAN. I'll give you a general idea though. If, for instance, your LAN consists of a server and 2 host systems connected through a switch, the NIC's on the three systems and the switch will need to be upgraded to support Giga-bit LAN speeds. Then comes the cabling, which needs to be Cat-5, or preferably Cat-5e. Another important mention is that, even after the above modifications to your LAN set-up, you shall only see a theoretical 1gbps transfer rate, the actual rate is significantly affected by each and every component attached, including the 2 hosts ans the server. Then there is attenuation, noise, etc. This is a description in a nutshell. if you did not understand it, by all means i would encourage you to research into it, but if you are not confident enough, then networking is a (black-)art best left to experts!
Do you need a special modem or LAN cable to have 1gbps speed?
yes , indeed.Standard cable have 100 mbs speed so you need a special one as well as an one gbps ethernet card
Is a broadband internet provider the same thing as a high speed internet provider?
Basically yes, since broadband can provide speeds of more than 1Gbps nowadays. Check out IVC Telecom who can provide different high speed broadband plans in Canada. They are an ISP based out of Montreal, Quebec.
Does EPON ONU support the GEPON network?
Yes, it does. When you buy an EPON ONU, you can use it with or without EPON. You can use it with EPON or use it with another type of network, such as Ethernet cable. GEPON is the upgrade version of the EPON. It has a higher capacity, and it is widely used in large-scale network construction. It can achieve a speed of 1Gbps. EPON ONU and GEPON ONU have the same appearance. You may contact at: +91 8910812600
Most popular expansion board nic is one that uses what kind of bus?
PCI the most popular expansion board NIC? PCI is characterized by a shorter connector length and a much faster data transmission capability than previous bus types. The fact that it uses either a 32 or 64 bit bus with clock speedrated at 33, 66, or 133 mhz with a maximum data transfer rate of 1Gbps helps.
Pros and cons of cat6 cabeling?
Cat6 cable is very similar to Cat5e cable. It is, simply put, just held to a stricter standard than Cat5e cable. Since Cat6 is made to a higher standard than Cat5e it will support higher speed transfers. Cat5e cable can be used for networks up to a 1Gbps speed while Cat6 is currently rated for up to 10Gbps speed. Cat7 takes this even further and supports 40Gbps. For normal usage on networks up to 1Gbps and no run being longer than 100 meters, Cat5e is completely sufficient for the network. To ensure forwards compatibility it may be worthwhile to install Cat6 cable while you're at it so you don't hit a speed cap in your network down the road.
