0
What else can I help you with?
What is a spring caliper used for?
There is no spring caliper.
What is the difference between a dial caliper and a digital caliper?
A dial caliper give a measure on the needle of a dial. Digital shows you a number.
What is a internal caliper?
A caliper that measures inside cylinders and similar things.
Which is more accurate ruler or a vernier caliper?
A caliper is more accurate.
What is a scewing caliper?
if its on a car or truck (brake caliper) it is how the emergency brake works, usually on the rear, it has a cable that turns the cylinder inside the caliper
When was the vernier caliper invented?
It is the measuring instrument it is invented by verniers its error is very small
What is the difference between a teves caliper and akebono caliper?
The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper. The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper.
Why was the venier caliper invented?
Vernier calipers was invented to measure the dimensions of objects to an accuracy of 2 decimal points. Eg: Length of a cylinder measured using this instrument can be say 6.46 cm.This gives an accuracy.
Where are the caliper bolts on a 2003 Ford F-250?
The caliper bolts are located in the caliper... You should see two bolts on the inside of the caliper...
What is a spring caliper used for?
There is no spring caliper.
Where is the brake caliper bushing on a 2004 trailblazer?
brake caliper bushings are the rubber mounts that sit inside the caliper bolt holes. They help guide the bolts when bolting the caliper up to the caliper bracket.
Can you drive with no caliper bolts in the front passenger caliper?
NO!
What is the meaning of slide caliper rule?
unbolt the caliper
What are caliper pins?
What are caliper pins The caliper pins hold the caliper in place and allow it to slide to make up for pad wear. UP in tyhe sky ok :) :) :)
Who invented the screw gauge?
The screw gauge, also known as the micrometer caliper, was invented by the English mathematician and instrument maker William Gascoigne in the 17th century. He developed it to improve precision in measuring small distances.
2000 Chevy S-10 the two bolts have been removed from the caliper but the caliper does not come off of the rotor How you remove the caliper?
HELLO IF YOU HAVE TAKEN OFF THE TWO BOLTS AND STILL WONT COME OFF USE A SCREW DRIVER AND PRY THE CALIPER UP FROM BETWEEN THE ROTOR AND CALIPER ALSO YOU CAN PUSH THE CALIPER BACK TOWARDS THE INNER SPRING BETWEEN THE CALIPER AND ROTOR SITS THIS WILL PUSH THE CALIPER BACK AND GIVE YOU EXTRA CLEARANCE TO PULL UP THE CALIPER
Is the caliper drilled and tapped to hold the caliper in place on a 1996 blazer or is the spindle?
The spindle/caliper bracket is threaded.
