An electrician, it is an electronic measuring instrument
how which is right and which is wrong. You need a voltage standard with that you can calibrate both to the standard
They are called test leads, you would use them to connect the multimeter to the points that are to be tested.
Current is measured in amps so the setting on a multimeter would be A Measuring current with a multimeter is only to be done by someone with training because it can be very dangerous It is much better to measure current with a clamp meter
Currently, the most accurate version would be, Fluke 88 Series V Deluxe Automotive Multimeter. This is the latest device that has been released currently.
If you're connecting it properly, then I would have to guess that the multimeter is defective.
how which is right and which is wrong. You need a voltage standard with that you can calibrate both to the standard
Technically, you don't. You need to calibrate a multimeter with something that is much more precise and accurate than a multimeter, such as a voltage, current, and resistance standard. Otherwise, it is not called a calibration.
measure the voltage,amphere resestance
Anyone who has the necessary know-how and the proper tools--specifically, reference sources for the various parameters the instrument measures--can calibrate a multimeter. It's actually pretty easy: on a multimeter that can be calibrated (a cheap one can't be), there are adjustment potentiometers in it for voltage, current, resistance, and the other parameters the instrument measures. You need a reference source for each parameter--a DC voltage reference would produce, say, 50 volts DC. You connect the meter to the reference and adjust the proper pot until the instrument reads 50 volts DC.
Calibrate it at sea level and then again at an elevated position where the height it known. This would allow one enough reference point to calibrate it accurately.
They are called test leads, you would use them to connect the multimeter to the points that are to be tested.
how we calibrate the level switch
Current is measured in amps so the setting on a multimeter would be A Measuring current with a multimeter is only to be done by someone with training because it can be very dangerous It is much better to measure current with a clamp meter
Yes, see link, but note: I would just by a multimeter instead of a test light (you can get a multimeter for as little as $3 from harbor freight)
I would imagine you are trying to set the on board compass, these require to circle on full lock whilst they self calibrate.
You can test a battery by using multimeter. Set the multimeter to the DC voltmeter setting and then place the leads of the multimeter across the leads of the battery. the multimeter will have a readout of the voltage.
An automotive multimeter, like any multimeter, can be used to test the voltage or current in some kind of circuit. As it is an automotive multimeter it is aimed more towards the used in a car.