There are 28160, 2.25 inch sections in a mile.
This unit is called volts.
You will have 24 volts DC.
The answer is 40,000 divided by 415 or 96.38 Amps. Watts is volts times amps.
I think the question probably needs a diagram with it. In general, the method to determine the voltage is to add up (sum) the voltages as you go around the circuit. Your battery or source will add volts. Most of the other devices will subtract volts. The total will be zero, or in other words, the things that add volts will equal the things that subtract volts. For example, if you have a series circuit where there is only one path, if the battery adds 12 volts and the first resistor takes away 7 volts, there will be 5 volts across the second resistor. Something to note, though, involves parallel circuits. When the circuit splits into two paths, the voltage measured between the place they split and the place they rejoin is the same.
The effects of being shocked by 13200 volts of electricity is probably death.
13200 is equal to 13200/1
13200 tons in 13200 tons
13199 + 1 = 13200
There are 1760 yards in one mile. Therefore, 13200 yards is equal to 13200/1760 = 7.5 miles.
The fraction of 60000 that is 13200 is 11/25.
There are 2000 pounds in one ton (short ton). Therefore, 13200 tons is equal to 13200 x 2000 = 26400000 pounds.
13200 ft = 2 miles and 2640 feet.
Diameter of circle: 13200/pi = 4201.690498 or about 4202 feet
13200
0.4
13,200