0
I think the question probably needs a diagram with it.
In general, the method to determine the voltage is to add up (sum) the voltages as you go around the circuit. Your battery or source will add volts. Most of the other devices will subtract volts. The total will be zero, or in other words, the things that add volts will equal the things that subtract volts.
For example, if you have a series circuit where there is only one path, if the battery adds 12 volts and the first resistor takes away 7 volts, there will be 5 volts across the second resistor.
Something to note, though, involves parallel circuits. When the circuit splits into two paths, the voltage measured between the place they split and the place they rejoin is the same.
What else can I help you with?
What are the appropriate ways to express the general meaning of on analogy?
The relationship between A and B is the same as C and D.
Does the distance between electrodes affect the voltage?
Not materially. The voltage is determined by the composition of the electrodes and the medium in which they are placed.
What is the difference between LVD and HVD?
Lvd: low voltage differential Hvd: High voltage " signalling techniques
What is series connection?
You have two resistors, each with resistance of 12Ω, and a 12-volt battery. 1). The resistors are in series across the battery. ..... A. voltage across each resistor ..... B. current through each resistor ..... C. power dissipated by each resistor ..... D. total power delivered by the battery 2). The resistors are in parallel across the battery. ..... A. voltage across each resistor ..... B. current through each resistor ..... C. power dissipated by each resistor ..... D. total power delivered by the battery ============================================ 1). ... A. 6 volts ... B. 0.5 Amp ... C. 3 watts ... D. 6 watts 2). ... A. 12 volts ... B. 1 Amp ... C. 12 watts ... D. 24 watts
What are the 2 inequalities?
A is greater than B (A>B). C is less than D (C<D). But what about "less than or equal"?
What is the distance between C and D?
The interval between C and D is a major second or a "whole step".
What is the voltage between points B and C?
.75 V
What is the unit for the measure of voltage?
A) amperes B) volts C) watts D) ohms
What is the distance between points C and F?
The distance between C and D + The distance between D and E + The distance between E and F. :o)
What is the relationship between the voltage equation and the electric field in a given system?
The voltage equation and the electric field in a system are related through the equation: V E d, where V is the voltage, E is the electric field, and d is the distance between the points in the system. This equation shows that the voltage is directly proportional to the electric field strength and the distance between the points in the system.
On a piano what is the note between the two black keys?
The note between C# and D# is D.
What regulates the flow of electrons in an electrical circuit?
a. amperage and voltage b. the size and length of the wires c. voltage and resistance d. fuses and circuit breakers
What is rectifier welding machine?
A welding rectifier takes in the a/c output of a welding transformer, and the output is d/c. Used with old school welding transformers which were all a/c, in order to get d/c for use with low hydrogen rods etc.
How many notes are between C and E?
Notes between C and EThere are three notes between C and E: C#/Db, D, and D#/Eb. Just so you don't get so confused, the person that answered this was correct, but some people are just beginning and you really don't want to confuse them because they aren't ready.Between C and E is just D. Unless you are playing with sharps and flats then the C key would be D flat (Db) and a C# and then D which is between C and E, then D# and E flat (Eb) D# and Eb are on the same black key. Along with C# and D flat (Db)Hope this helps!!!
Where c stands?
If it is a capital c it stands between b and d.
Can you use a C battery instead of D battery?
Yes you can use C-cells ... they are the same voltage BUT, they will rattle around and loose contact. Your best bet is to get some more D-Cells.
Is there any priority between logical and logical or operators in c language?
Yes, a&b|c&d means (a&b)|(c&d), just like a&&bc&&d means (a&&b)(c&&d)
