Want this question answered?
Cars of this Era had no VIN #. They did however have a build plate. It can be located almost anywhere but if most commonly found on the firewall under the hood.
There were no VIN numbers in 1937. Look for a manufacture plate which can be located almost anywhere. Firewall, glove box, trunk, etc
it is located on the driver side firewall it has one bolt holding it on hope this helps
The firewall is located between the passenger compartment and the engine bay.
The 2003 Pontiac Montana EGR valve is located on the firewall. The valve will be on the driver side of the firewall.
The firewall divides the passenger compartment from the engine compartment
The 1992 Ford Ranger ICM is located on the firewall in the engine compartment. The ICM will be on the drivers side of the firewall.
The Heater Core is located passenger side next to the firewall, inside the vehicle.The Heater Core is located passenger side next to the firewall, inside the vehicle.
Usually its just aft of the first firewall from the engine. There is the engine, then firewall, then battery, then second firewall.
The MAP sensor is located on the firewall of the engine compartment, right by the stamped VIN number on the firewall..
The 1998 Toyota ignition coil is located on the firewall, in the engine compartment. The ignition coil can be found on the passenger side of the firewall.
The 1993 Hyundai ignition module is located on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.