0
Anything under 50 volts of electricity is not considered a fatal level of electrocution, but, you should consult OSHA for more specific safety information regarding working with live electrcity.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Why the usage of 50 volts is safe?
50 volts is about the maximum voltage that can be used safely with dry skin. 50 v DC is used in most telephone systems.
What is 50 percent of 120 volts?
50% of 120 volts = 50% * 120 = 0.5 * 120 = 60 volts
How much volts does it take for it to penatrate human skin?
tazers start off at 50,000 volts to make contact through the skin and then is switches to 5,000 after it's made it through the skin to keep you stunned
Is it safe to replace a 6 ampere 125 volts fuse with 6 ampere 250 volts fuse?
Yes, that is safe.
What are typical voltages for half charged batteries?
12.6 volts = 100% Charge 12.4 volts = 75% 12.2 volts = 50% 12.0 volts = 00%
How many amps is 8 gauge wire 12 volts DC good for?
Generally 40 amps continuous or 50 amps surge is safe.
What is the recommended maximum safe voltage for outdoor uses in Europe?
In Norway it is 230 Volts, 16-25 amp, 60 Hz, grounded In rest of Europe it is 110 Volts 10-15 amps, 50 Hz, probably grounded too.
Do you check a battery's charge using volts or amps?
Volts. 12.6 volts = Full Charge 12.4 volts = 75% Charge 12.2 volts = 50% Charge 12.2 volts = 25% Charge
Is it safe to connect 380 volts 3 phase supply to 220 volts 3 phase supply?
No.
Is it safe to use 230 volts 50 hz appliances where power supply is 230 volts 60 hz?
If the appliance is strictly resistive heating there will be no problem. If the appliance has a motor load connected with it, the unit will operate a bit slower and operate a bit warmer.
What is 50 watts?
Amps * Volts = Watts. 50 Watts at 120 Volts = .4 Amps 50 Watts at 12 Volts = almost 4.25 Amps 50 Watts at 1 Volt = 50 Amps
What are the safe levels of direct current voltage?
60 Volts is generally considered a safe approximate maximum. In many applications that require 120 volts DC, the system will be center tapped so you have +60v and -60 volts so the hot to ground voltage is within safe limits.
