0
If you combine multiple classful networks it is supernetting, when you make them smaller you are subnetting .
CIDR is a condition where you no longer consider the classful boundries. You no longer need to think of the words subnetting or supernetting really because everything is a simple division between network and host.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Which network and mask combination requires the use of a classless addressing solution?
The network and mask combination that requires the use of a classless addressing solution is 172.16.0.0/12. Classless routing is supernetting and is known as CIDR, Classless Inter-Domain Routing.
What is CIDR?
CIDR (Classless Inter-Domain Routing, sometimes known as supernetting) is a way to allocate and specify the Internet addresses used in inter-domain routing more flexibly than with the original system of Internet Protocol (IP) address classes. As a result, the number of available Internet addresses has been greatly increased. CIDR is now the routing system used by virtually all gateway hosts on the Internet's backbone network. The Internet's regulating authorities now expect every Internet service provider (ISP) to use it for routing.
When was CIDR-FM created?
CIDR-FM was created in 1948-09.
What two advantages does cidr provide to a network?
The advantages of CIDR over the classful IP addressing are: # CIDR can be used to effectively manage the available IP address space. # CIDR can reduce the number of routing table entries. # CIDR can be used to effectively manage the available IP address space. # CIDR can reduce the number of routing table entries.
What is supernetting explain with example?
IntroductionBecause subnet masks can get very confusing, the creators of this wonderful network technology also made available a few things to make life somewhat easier.The following chart is really a summary of what we've seen so far. It gives you a good idea of the networks we can combine and the result we'd see.The Supernetting/CIDRchartThere are four columns available in our chart:The CIDR Block, the Supernet Mask, Number of Class C Networks and the Number of Hostscolumn.Class CCIDR BlockSupernet MaskNumber of Class C NetworksNumber of Hosts/14255.252.0.01024262144/15255.254.0.0512131072/16255.255.0.025665536/17255.255.128.012832768/18255.255.192.06416384/19255.255.224.0328192/20255.255.240.0164096/21255.255.248.082048/22255.255.252.041024/23255.255.254.02512/24255.255.255.01254/25255.255.255.1281/2126/26255.255.255.1921/462/27255.255.255.2241/832/28255.255.255.2401/1616/29255.255.255.2481/328/30255.255.255.2521/644I am going to explain the meaning of each column, although you probably already know most of them.The CIDR BlockThe CIDR Block simply represents the number of bits used for the subnet mask. For example,/14 means 14 bits assigned to the subnet mask, it is a lot easier telling someone you have a14 bit subnet mask rather than a subnet mask of 255.252.0.0 :)Note: In the above paragraph, I called the 14 bits as a subnet mask, when in fact it's a supernet mask, but because when you configure any network device, the field you will need to enter the value is usually named as the 'subnet mask', I decided to name it 'subnet mask' aswell, in order to avoid confusion.I'd like you to pay particular attention to the CIDR Block /24, and /25 to /30. These blocks are highlighted in yellow and blue because I want them to grab your attention :)When we use a CIDR Block of 24 (24 bit subnet mask) we are not Supernetting ! This is a default subnet mask for a Class C network. With CIDR Blocks /25 to /30 we are actuallySubnetting and not Supernetting !Now you might wonder why I have them in the chart. The fact is that those particular CIDR Blocks are valid, regardless of whether applying them to a network means we are Subnettingand not Supernetting. If you have dealt with any ISPs and IP Address assignments, chances are you would have been given your IP Addresses in CIDR format.A good example is if you wanted a permanent connection to your ISP and only required 2 IP Addresses, one for your router and one for your Firewall, you would be assigned one /30 CIDRBlock. With such a subnet mask you will have 4 IP Addresses, from which 2 will be reserved (one for the Network address and one for the Broadcast address) and you're left with 2 that you can assign to your hosts (router and firewall).The Supernet MaskBasically, this is your Subnet mask. When you configure the devices that will be attached to the specified network, this is the value you will enter as a Subnet mask. It's also the decimal value the CIDR Block specifies. For example, a /24 CIDR block means a 24 bit Subnet mask, which in its turn translates to 255.255.255.0 :) Simple stuff !Number of Class C NetworksThis number shows us how many Class C Networks are combined by using a specific Supernet mask or, if you like, CIDR Block. For example, the /24 CIDR Block, 255.255.255.0 Supernet mask is 1 Class C Network, whereas a /20 CIDR Block, 255.255.240.0 Supernet mask is 16 Class C networks.Number Of HostsThis value represents the number of hosts per Supernet. For example, when we use a /20CIDR Block, which means a Subnet (or Supernet) mask of 255.255.240.0, we can have up to4096 hosts. Pretty straightforward stuff.There is one thing you must be careful of though ! The value 4096 does not represent the valid, usable IP Addresses. If you wanted to find out how many of these IP Addresses you can actually use, in other words, assign to hosts, then you simply take 2 IP Addresses from that number (the first and last IP Address), so you're left with 4094 IP Addresses to play with :)Why take 2 away ? You shouldn't be asking questions like that if you have read the IP and Subnetting sections but I'll tell you anyway :) One is reserved for the Network Address and one for the Broadcast Address of that network !SummaryThat completes the explanation of the Supernetting/CIDR chart. You will see that Supernetting and Subnetting have quite a few things in common, and this is simply because they work on the same principle.Again, if you have the whole topic, or certain sections hard to understand, you should give yourself a small break, and then come back for another round :)
What is a CIDR block?
This is the result of grouping two or more classful networks together. Also called supernets.
Why did the ietf introduce cidr and what does cidr stand for?
To help reduce the providers interfacing directly into the Internet. Classless routing.
What does CIDR stand for and when was it founded?
Classless Inter-Domain Routing (CIDR) is a method for allocating IP addresses and routing Internet Protocol packets, Or (CIDR) The Center for Inherited Disease Research, that was founded in 1997.
What is the aggregation of IP network addresses advertised as a single classless network address?
Supernetting
What is the default mask for class A in CIDR notation?
2
What CIDR notation takes the form of the network ID?
forward slash
In CIDR conventional network class distinctions do not exist?
True, they do not exist.
