Start with checking the bulb and socket then wiring.
If it is the same light for the direction signal and that works OK then it's the hazard switch or relay.
It doesnt hurt
Back then, the VIN was located on the left door jamb.
It is on the back left side of the intake, just above the valve cover.
in the back of the truck to the left of the gas tank. probably located in front of the wheel well Drivers side of the truck on the frame
If you are standing in front of the truck with the hood up, it is in the back left corner to the right of the heater resistor.
as we know that sequential ckt = combinational ckt + feedback So if we clear the hazards of combinational ckt then also some type of disturbance left in the ckt .That disturbance is known as ESSENTIAL HAZARDS.
Standing in front of engine, It is on the bottom left side of the engine under the exhaust manifold towards the back.
It is located in the back panel of the interior near the left taillight entry panel towards the back left wheel well. Go into the left rear access panel in the inside back of the truck and you'll have to fish around for it towards the front of the car several inches :-)
Standing in the front of the engine, It will be on the back bottom left side of the engine. You will have to lay under the engine to see it.
Standing in the front of the engine it will be on the bottom back left side of the engine. Will have to lay under the truck to see it.
If you are asking how to back a trailer, face forward and look into the side view mirror, place one hand at the bottom of the steering wheel, if you want the trailer to go to the left then move the steering wheel to the left, if right then go to the right.
Once the truck's wipers are ready, the truck driver takes a break. Go back to Greg's house and open the blinds to get him away from the video games. When you go outside, Manny will drive by in the snowplow truck. Follow him left to the Laundromat.