because it is hard
u can put your hand and grad the paper clip.
If you are addicted to it there are therapists who can help with that.
filter paper is paper and a sieve is a kitchen utensil used to put objects (pasta,rice) and drain water.filter paper is used to seperate smaller granules (sand etc.) and a sieve is used to seperate larger granules(peas, rice, pasta etc.)
When the copper sulphate is mixed with sand, pour water on the mixture and let it stand for a few minutes. Have a filter funnel and filter paper handy. Put filter paper in funnel and pour the water, copper sulphate and sand mixture in. The copper sulphate will come out in liquid form, no weaker than first used.
Filtration. Place a glass funnel over a beaker, and put a circle of filter paper inside the funnel. Pour the sand-water mixture into the filter paper. The sand should get trapped by the paper, but the water should seep through into the beaker.
It's Sand..
I would let the sand settle out of the mixture, then pour off the water, leaving the sand behind. If you needed to extract the remainder of the water, put the wet sand into a centrifuge and spin it until the water is out and collected from the centrifuge.If you want to separate sand from water take a beaker a pebble and a filter paper then fix the filter paper in the pebble and put it on the beaker and add the mixture of water and sand then the water will be in the beaker and the sand will be on filter paper. Remember use Steve for thick things such as tiny stones etc and apply the same method.
Riding a bicycle on a tarred road would be easy, since it's a firm and grippy surface. Riding a bicycle on sand paper would depend on what you've put the sand paper on. If it's on a firm surface, it'll be fine. If it's on a really soft surface, riding would be heavy. Not because of the sand paper, but because of the wheels sinking into the layer underneath.
place it on the toe and measure it width and length and then cut into shape and stick it on easy and simple if the toe is ruf sand it with sand paper
Put the sand and salt mixture into a beaker of water. Put more water or raise the temperature of the water until the salt completely disappears. Pour everything in the beaker onto a piece of filter paper. The sand will stay on the filter paper while the water and salt solution will pass through the filter paper. To obtain the sale, simply boil the water and the remaining solid after all the water boiled is salt.
put it in vinegar for 24 hours or + or have fun sanding it with sand paper:)
Put a filter paper cone in a funnel or a sheet of filter paper in a sieve and place the funnel or sieve over an empty container. Gently pour the mixture in. The salt water will go throughbut the sand will be trapped by the filter paper. Allow it to dry out.