Never heard of this before. Any noise that comes from a motor is usually produced by faulty bearings, loose end bells or cooling fan becoming loose from the armature shaft. When a bearing fails the armature is allowed to drag on the stator and this produces noise and heat with motor winding failure not far behind if left unchecked. The overload protection should trip to try and save the motor but constant resetting will finally do the motor in.
how reversing an ac single phase induction motor to wark as induction generator
single-phase induction motor is used in ceiling fan.
Single phase Induction motor
The single phase induction motors are made self starting by providing an additional flux by some additional means. Now depending upon these additional means the single phase induction motors are classified as: 1.Split phase induction motor. 2.Capacitor start inductor motor. 3.Capacitor start capacitor run induction motor. 4. Shaded pole induction motor.
capacitive start motors start by themselves however a normal single phase induction motor requires a starter motor to 'kick-start' the motor into action.
Could be a single phase induction motor of 20-40 watts.
revolving field theory of single phase induction motor
A single phase induction motor is mainly used in fans.It is capacitor start capacitor run induction motor.In three phase induction motor squirrel cage induction motor is mainly used in elevators,lifts,cranes.slip ring induction motor is mainly used in electrically driven ships.
Single phase induction motor is used in grinder.
anticlockwise
fan is a capacitor start capacitor run single phase induction motor. since single phase induction motors are not self starters, caused by discontinuty in stator mmf. so to iniate rotation single phase supply is splitted 90 degree apart by a capacitor to convert it to a 2 phase motor, which produces a continued synchronously revolving mmf in stator to start the motor. cool !!
Split Phase Induction Motor.