You have a warped rotor.
You probably need an alignment .
The car "jerks". Pulls to one side or vibrates? Vibration when applying brakes is most likely warped rotors. Another cause could be loose caliper bolts. If the car is pulling it may be a caliper sticking or worn suspenion/steering parts.
dont press on the brakes .
No.
Press the brakes or down shift
If the car vibrates when the brakes are applied, it could be a sign that the brakes or rotors need to be checked or replaced. When a problem like this occurs, it is best to get it checked out as soon as possible to avoid worsening the problem.
i ment that if the sensor in the dash stays on after i press the brakes and dosent go off till i turn the car back on and dont press the brakes?
hypothisies
hypothisies
Depends on how hard you press the brakes
If you are saying it vibrates while applying the brakes just before you come to a stop, then the brake rotors are warped. You will need to have them turned and trued, and replace the front brake pads. If you are saying it vibrates while you are sitting still, then look for a vacuum leak.If you are saying it vibrates while applying the brakes just before you come to a stop, then the brake rotors are warped. You will need to have them turned and trued, and replace the front brake pads. If you are saying it vibrates while you are sitting still, then look for a vacuum leak.
Bad logic