Most likey cause is the 'stop lamp switch' It is a electric switch located on the brake pedal inside the car, about half way up on the brake pedal. Pretty cheap too, I think the switch is only like $25 bucks. 2 connectors on the switch and then it turns out. hope that helps
They are warning lights, not diagnostic codes. The ESP (electronic skid protection) and BAS (brake assist system) lights stay on when there is a malfunction. You will need to have the ABS (anti-lock brake system) computer checked for codes.They are warning lights, not diagnostic codes. The ESP (electronic skid protection) and BAS (brake assist system) lights stay on when there is a malfunction. You will need to have the ABS (anti-lock brake system) computer checked for codes.
Its probably a stop lamp switch, most common part for a esp/bas/abs lights. but can also be bas travel sensor, ect.
in the fuse box of the engine compartement, take of the cover of the box then see that
The cast of Dishes64 - 2000 includes: Bas Dumoulin as Bas
The first step is to have the abs system checked for codes. Those lights stay on when the computer has detected a malfunction. When you know the code, you can test for possible causes.
Mieux qu'ici-bas was created in 2000-09.
Im having problems with my 2006 dodge magnum. i dont drive it that much it only has 60k miles and the lights just turn on today. is there anything i can do about this?
It is integrated onto the ABS pump in left front of engine compartment.
You have to fix the cause of the code that is set in the ABS module.
It should tell you in the handbook. For the SLK it is turn the steering from lock to lock whilst the engine is running. May be the same for other Mercedes.
It is a bad sensor on one of the wheels.
Brake assist system. The abs system will help apply more pressure to the brakes in a panic stop.