because of dissolution process that occurs for anode through electroplating process
The examples of metals used in electroplating are Chromium and Lead.
A kinds of metals can be electroplated, such as gold, silver, tin, zinc, copper, cadmium, chromium, platinum and lead
the air gets thinner.
it is an anode
Oru nall vadai sutta patti kaila plastics oorukiruchu athunala Einstein kandu pidichathuthan electroplating. Electroplating ku paatti quarentee
yes, the weight of anode is decreased & added to the weight of the cathode during electroplating
The cathode gets coated during electroplating.
to transfer anode to cathode
The metal that is the cathode gets coated during electroplating.
The examples of metals used in electroplating are Chromium and Lead.
There is two ways it can be done. Hot-dipping or electroplating. In hot-dipping the steel to be coated is cleaned, then dipped in molten galvanizing metal (tin, zinc ...etc.). When cooled the steel is coated with a coarse coating of material. In electroplating, the metal being coated is attached to a cathode, and the plating material (chrome, zinc, gold...etc.) is attached to an anode and both are dipped into a bath of electrolytes (metallic salts of the galvanizing metal) and an electric charge is applied. The anode will dissolve into the electrolyte bath to replace the metal drawn out of the bath and deposited in a thin layer on the cathodic metal. Electroplating usually produces a smoother, thinner and easily polished coating.
the metal on which electroplating is to be done is taken as cathode ( negative electrode) . the metal of which electroplating is to be done is taken as anode ( positive electrode) and the salt solution of the metal of which electroplating is to be done is taken as electrolyte . example- if we want to electroplate iron with copper then iron is taken as cathode and copper is taken as anode and electrolyte is copper sulphate.Electroplating is the process of plating one metal onto another by hydrolysis, most commonly for decorative purposes. This is done through the use of copper in a copper sulfate bath.
The metal being used as the cathode
elevation
If ozone gets thinner, the UV will enter the earth. Uv rays are the fatal rays of the sun.
The atmosphere gets thinner the higher you climb, which is why oxygen tanks are used by climbers scaling Mount Everest.
When the ozone layer gets thinner, its power becomes low. It causes the UV to penetrate it.