answersLogoWhite

0

No, it couldn't be the intake manifold. The only way is if it was the head gasket or the trans. cooler in the radiator. But that's only if you have an automatic transmission.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where is the PCV valve located on a 1992 Suzuki Sidekick?

It is screwed into the intake manifold between the throttle body and the valve cover


Where is the IAT sensor located on a 1998 Suzuki Sidekick?

IAT's are located primarily connected through the air box, where you aor filter is, by the throttle body, by the intake manifold and is a 2 wire connector.


How do I replace the head gasket on a 1995 suzuki sidekick?

Remove the intake manifold, exhaust manifold, and then remove the head. Scrap off the old gasket and install a new one. Reinstall the head and Torque the head bolts in the proper sequence. Reinstall the intake and exhaust manifold torque the bolts to the proper torque. This is a major repair and not for a novice to try.


Where is throttle located on 1995 suzuki sidekick?

On a 1995 Suzuki Sidekick, the throttle is located on the throttle body, which is part of the intake manifold assembly. You can access it by opening the hood and looking at the engine bay; it is typically connected to the accelerator pedal via a cable. The throttle body is positioned near the front of the engine, where the air intake hose connects. If you need to inspect or adjust it, ensure the engine is off and cool for safety.


Where is the PCV Valve located at on a 1998 suzuki sidekick?

The PCV Valve on a 1998 Suzuki Sidekick is located on top of the manifold. There is a small plastic cover that can be taken apart by pulling sideways on it. It has two or three hoses attached and is sometimes colored blue.


Where is the PCV valve located on the 1993 Suzuki Sidekick?

On the 1993 Suzuki Sidekick, the PCV (Positive Crankcase Ventilation) valve is typically located on the valve cover. It may be found near the rear of the engine, connected to a rubber hose that leads to the intake manifold. To access it, you might need to remove other components depending on the engine configuration. Always refer to a specific repair manual for detailed guidance.


Where is a suzuki 1997 sidekick distributor located?

Where is a suzuki 1997 sidekick distributor located?"


How do you replace the air filter in the 2005 suzuki aerio?

It is pretty easy to replace the air filter in a 2005 Suzuki Aerio. Remove and open the air intake manifold, remove the old air filter, put in the new filter and reattach the air intake manifold.


Where is PVC valve on a 1996 zuzuki sidekick?

On a 1996 Suzuki Sidekick, the PCV (Positive Crankcase Ventilation) valve is typically located on the valve cover. It is often positioned near the rear or side of the engine, connected to a rubber hose that leads to the intake manifold. To access it, you may need to remove any obstructions, such as the air intake duct or other components. Always consult a repair manual for specific guidance and diagrams.


Where is the throttle body located on a 2004 suzuki forenza?

The throttle body on a 2004 Suzuki Forenza is located on the intake manifold, just behind the air filter and intake duct. It connects the air intake system to the engine's intake manifold, allowing air to flow into the combustion chamber. To access it, you will typically need to remove the air intake components and possibly some surrounding parts for better visibility and maneuverability.


Where is the o2 sensors on a 94 suzuki sidekick?

On the exhaust pipe between the exhaust manifold and the catilitic converter. Looks kind of like a spark plug screwed into the pipe.


Do you have a transmission diagram for a Suzuki sidekick?

no