In areas with air of varying temperatures, the cooler air will sink into the less dense warmer air. Adding cooler air at a higher point in the room will improve mixing as it settles into the room, rather than remaining near the floor.
For the same reason, heating (without a fan) is more effective when done at a lower level, so that the warm air rises into the occupied area.
In areas with air of varying temperatures, the cooler air will sink into the less dense warmer air. Adding cooler air at a higher point in the room will improve mixing as it settles into the room, rather than remaining near the floor.
unary operators like ++,--
Metal and or plastic frames. The lens are usually clear plastic, rather than the previous glass lens.
A language based on functions rather than objects. You code to perform a series of tasks usually sequentially to achieve an objective, rather than code objects that relate to each other. Generally less flexible and harder to maintain.
The element is made of special high resistance wire so the power is dissipated in the element rather than the low resistance cord.Power(watts) = Resistance (ohms) X {Current(amperes)}squared
Cast iron is, as the name implies, "iron" which has been "cast", or melted and poured into a mold. The material is usually not really pure iron but rather an alloy including carbon and (often) silicon.
air-conditions are usually placed at a higher level rather than at a lower level.
Hot air rises but not cold air.
hot air rises so the air con will cool down the air above so air cons will be placed at a higher level
Unlike warm air, cold air does not rise - it falls to the ground. Thus, it's more ideal for an AC system to be placed high rather than low.
Heat rises, cold falls. Hot air will rise towards the ceiling, while cold air will travel towards the floor. Thus, it's beneficial to have the air conditioning at a higher level to allow the cold air flow downwards.
Two reasons. One, cold air doesn't rise - it sinks. Two, hot air rises. One of the functions of an air conditioner is to remove humidity from the area being cooled - thus, the hot air will rise into the AC intake.
hot air rises but not cold air. EDIT: If you are referring to the fan speed, then a lower setting will allow the air to "condition" properly and blow much cooler air. Often when the fan is set on the highest speed, the air will have less time to cool and the unit may be heating from its own motor, causing the lesser cooled air to warm slightly. If you are referring to where to place the unit in your home, a higher location will cause the cooler air to circulate better before dropping to a lower level.
As the ccol air is heavy and warm air is lighter .if ac is place higher the ,it will cool down the warm air above and ,after cooling cool air will shift downwards replace by the rising warmer air from downside and the cycle goes on.If u place the ac on lower level then the warm air in the upper side of the room wil get trapped and will take longer time to cool.
A buffer is a (usually temporary) place to store data. If you have a data stream that needs to be processed, it will usually be placed into a buffer and then read from the buffer, rather than trying to read the stream directly.
Walmart, Target, Meijer, and Home Depot all sell rather low priced air conditioners for in-home use. The ones that go in your window are very easy to install and take down.
Infantile spasms usually cease spontaneously by age five, but are often replaced by seizures of other types. Therefore, emphasis is placed on lifelong seizure prevention rather than recovery
It does not depend on whether or not the individual is a student, but rather what age they are and their past records. Younger people are usually charged higher rates for insurance as they are often regarded as less responsible.