Because, if you touch a bare wire, and it has more than 500ma it can stop your heart. If not it just hurts a lot.
They can touch each other for arcing and possible fires. Also accidental touching your body to the wires causes shocks to humans.
Assuming the wires are the correct gauge for application and breaker you use black and white wires as hot. Put red electrical tape on each end of white wire and connect red and black to the breaker output and bare wire to ground lug in panel. At receptacle connect black and red to hot contacts and bare wire to ground lug.
because it can can cause fire or electrical shock.
yes wires is electrical panel
Extra wires to a light fixture are dangerous. It can cause electrical shock when having contact to people therefore it must be guarded to avoid physical contact.
If you mean 2 bare copper wires those are the ground wires. Tie them together and then connect the light fixture ground wire which will be green or bare copper to those ground wires.
Besides tripping over a wire, or having it poke you in the eye, wires aren't really hazardous, regardless of how long they are.If a wire is charged to a high electrical potential, then it can be hazardous, but you didn't mention that in your question.
Yes, bare wires can hurt you.
By bare wires i presume that you mean wires not in closed in a protective sheath. As an experiment wires will have to be changed around quickly to see what the results of the connection produce. Once an experiment changes status to equipment production the regulations change to safety. The customer has to be protected from electrical shock. In an electrical experiment safety has to be the responsible of the person doing the experiment.
yes. do not touch unless you are an qualified electrician.
Bare Wires was created on 1968-06-21.
Assuming the wires are the correct gauge for application and breaker you use black and white wires as hot. Put red electrical tape on each end of white wire and connect red and black to the breaker output and bare wire to ground lug in panel. At receptacle connect black and red to hot contacts and bare wire to ground lug.
because it can can cause fire or electrical shock.
Yes. Roaches Love To Play With Electronics All The Time!!
Insulation covers the copper wires that carry electricity to prevent shorting or electrocution. Without insulation, the bare wires could cause an electrical fire, or an electric shock, possibly resulting in death.
The electrical terminology of a wire with no insulation on it is a bare wire.
yes wires is electrical panel
In house wiring you have hot (Black), neutral (White) and ground (Bare wire).