answersLogoWhite

0

Fuse wire is designed to blow if a short-circuit or other fault occurs, so preventing the cables or components from burning-out. It is important to use fuse wire at the lowest amps. For instance, most appliances will come with a 13 amp fuse in the plug. If the plug is for a lamp, then 13 amp is too high. I would change the fuse to a 2 or 3 amp. A 13 amp fuse is for appliances up to 3000 watts. If in doubt ask an electrician.

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

What do you call a fuse with two black wires attached?

A fuse with two black wires attached is typically called a "black wire fuse." The black wires serve as the connections for the electrical circuit, with the fuse serving to protect the circuit from overloading or short circuits.


How does the fuse wire save your electrical appliances?

The fuse wire is rated for a specific amount of amperage. If the amperage exceeds that rating, the fuse wire will quickly melt. The current flow in the circuit is interrupted, thereby protecting the appliance from an overload condition.


Why a fuse of high voltage is used for electrical appliances of less voltages in comparison to fuse?

for those appliances do not break immediately...........


What is a 15 amp fuse for?

A 15 amp fuse is designed to protect electrical circuits by interrupting the flow of electricity when the current exceeds 15 amps. This prevents overheating and potential damage to appliances or wiring due to overloads or short circuits. Commonly found in household electrical systems, it ensures safety by preventing fires and electrical hazards. It's important to replace a blown fuse with one of the same rating to maintain proper protection.


What is a fuse in an electrical appliance?

A fuse is a safety device that protects electrical appliances from overcurrent or short circuits. It is designed to melt and break the circuit if the current exceeds a safe level, preventing damage to the appliance or a potential fire hazard. Fuses need to be replaced once they have blown to restore the electrical circuit.


What does the main power outlet fuse do?

The main power outlet fuse serves as a safety device that protects electrical circuits from overloads and short circuits. It interrupts the flow of electricity when it detects excessive current, preventing potential damage to appliances and reducing the risk of fire. By breaking the circuit, the fuse ensures that only a safe amount of electricity passes through, maintaining the integrity of the electrical system.


What is a 5 amp fuse used for?

A 5 amp fuse is typically used to protect low-power electrical circuits and devices from overcurrent conditions. It is commonly found in household appliances, lighting circuits, and small electronic devices. When the current exceeds 5 amps, the fuse melts, breaking the circuit and preventing damage to the equipment or potential fire hazards. This ensures safety and reliability in electrical systems.


What is a device used to keep electrical circuits from overheating?

A fuse.


Are the electrical gauges in a peterbilt 379 circuited through a fuse?

Yes, all circuits are protected by a fuse.


Does the fuse box need to be grounded?

Yes, it is important to have the fuse box properly grounded. Grounding the fuse box helps to protect you and your electrical devices from electrical faults and ensures the safe operation of the electrical system in your home or building. It provides a path for electrical current to flow safely into the ground in case of a fault or surge, preventing potential electrical shock or damage to appliances and circuits. It is best to consult a licensed electrician to ensure that your fuse box is properly grounded according to local electrical


Where is the fuse for the ground for a 1984 Monte Carlo?

Ground wires, conductors, or circuits ARE NEVER FUSED. Fuses and circuit breakers are put in the wires and conductors supplying electrical current TO devices needing electrical power, and ARE NEVER PLACED IN the ground portion of the circuit between the electrical power consuming device, and the battery negative terminal.


What is the percentage of copper in fuse wires?

The percentage of copper in a fuse wire is very small or non existent. Fuse wire is made from mixing different types of alloys together of aluminum, nickel, iron and chromium. The alloys result in compounds called cronifer and aluchrom. The composition of the different fuse wires results in how the characteristics of the fuse fault current is handled.