Want this question answered?
There are more than a dozen vacuum hoses in your Chevrolet S 10 pickup truck. The majority of the vacuum hoses are connected to the transmission and the air cleaner. The vacuum hoses are also connected to the fuel injection system.
OIL It can create an intense fire.
Hydraulic hoses are used to drive the fan.
Round plastic container under hood with 3 rubber hoses connected to top. Hoses go to engine and gas tank
look to the right of the engine you will see the water hoses connected to it
there were hoses coming to the wiper motor from the washer fluid tank and the other hoses go to the cowl panel or on the wiper blade arms themselves to spray the glass.
hese hoses are called "heater hoses" they are from the front heater hoses which heat the car and they are connected to the front heater hoses under the car hood on right side
its connected under your throttle body which is connected to your intake manifold. Should be help by 2 screws and connected to a couple hoses.
Oxygen tank, Acetylene tank, regulators for each tank, hoses, a torch, and a striker. Check valves are also a good idea if they're not already installed.
minimize refrigerant realease when hoses are connected and disconnected.
Connect the Freon recharge hoses to the ports on the air conditioner compressor. With the hoses connected release the Freon into the compressor.
We commonly find water in fire hoses. The fire hose with its nozzle is used as a way to get water onto a fire. By connecting the hose to a pump, which is in turn connected to a water source, that hose will provide a high-pressure conduit for the transfer of the water.We also find fire hoses connected between different units to deliver water. If a truck sets up on the fire ground to deliver water, it is usually connected to a water source via an engine, which is connected to a hydrant. Hoses connect the hydrant to the engine, and the engine to the truck to transfer water.