0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How does an EMF meter help ghost hunting?
Ghosts are made up of a lot of energy and with a ElectroMagnetic Fhenomena detector, it can pick up on unnatural readings of energy anywhere
What is nuclear energy made of?
Nuclear Energy is made up of atoms that can be naturally made or man made.
Who made energy and power?
energy and power are not made they are converted into other forms of energy or stored as chemical bond
Are ghosts made out of energy?
yes and they are made out of a special energy called ectoplasm
Why can energy be made?
Actually it can NOT be made. At least, you can't make energy out of nothing.
Why is the rotor disc of energy meter made thin?
Aluminium is a good conductor but it is non magnetic material and therefore cannot be altered by magnetic currents and run true and hence it is preferred.
What are the various test made before the installation of energy meter?
The various tests that are made before the installation of an energy meter are completed to ensure the safety and accuracy of the meter. These tests include EMC, vibration and core meter accuracy testing.
What are the energy and matter made in a black hole?
Black holes are hidden behind an even horizon we do not know what happen in side them.
Working of single phase energy meter?
An electric meter or energy meter is a device that measures the amount of electrical energy supplied to or produced by a residence, business or machine.The most common type is a kilowatt hour meter. When used in electricity retailing, the utilities record the values measured by these meters to generate an invoice for the electricity. They may also record other variables including the time when the electricity was used.Modern electricity meters operate by continuously measuring the instantaneous voltage (volts) and current (amperes) and finding the product of these to give instantaneous electrical power (watts) which is then integrated against time to give energy used (joules, kilowatt-hours etc). The meters fall into two basic categories, electromechanical and electronic.Electromechanical metersThe most common type of electricity meter is the Thomson or electromechanical induction watt-hour meter, invented by Elihu Thomson in 1888.[1][2]Technology The electromechanical induction meter operates by counting the revolutions of an aluminum disc which is made to rotate at a speed proportional to the power. The number of revolutions is thus proportional to the energy usage. It consumes a small amount of power, typically around 2 watts.The metallic disc is acted upon by two coils. One coil is connected in such a way that it produces a magnetic flux in proportion to the voltage and the other produces a magnetic flux in proportion to the current. The field of the voltage coil is delayed by 90 degrees using a lag coil. [1]This produces eddy currents in the disc and the effect is such that a force is exerted on the disc in proportion to the product of the instantaneous current and voltage. A permanent magnet exerts an opposing force proportional to the speed of rotation of the disc - this acts as a brake which causes the disc to stop spinning when power stops being drawn rather than allowing it to spin faster and faster. This causes the disc to rotate at a speed proportional to the power being used.The type of meter described above is used on a single-phase AC supply. Different phase configurations use additional voltage and current coils.ReadingThe aluminum disc is supported by a spindle which has a worm gear which drives the register. The register is a series of dials which record the amount of energy used. The dials may be of the cyclometer type, an odometer-like display that is easy to read where for each dial a single digit is shown through a window in the face of the meter, or of the pointer type where a pointer indicates each digit. It should be noted that with the dial pointer type, adjacent pointers generally rotate in opposite directions due to the gearing mechanism.The amount of energy represented by one revolution of the disc is denoted by the symbol Kh which is given in units of watt-hours per revolution. The value 7.2 is commonly seen. Using the value of Kh, one can determine their power consumption at any given time by timing the disc with a stopwatch. If the time in seconds taken by the disc to complete one revolution is t, then the power in watts is . For example, if Kh = 7.2, as above, and one revolution took place in 14.4 seconds, the power is 1800 watts. This method can be used to determine the power consumption of household devices by switching them on one by one.Most domestic electricity meters must be read manually, whether by a representative of the power company or by the customer. Where the customer reads the meter, the reading may be supplied to the power company by telephone, post or over the internet. The electricity company will normally require a visit by a company representative at least annually in order to verify customer-supplied readings and to make a basic safety check of the meter.AccuracyIn an induction type meter, creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.
Who made the meter a meter?
me!
How does an EMF meter help ghost hunting?
Ghosts are made up of a lot of energy and with a ElectroMagnetic Fhenomena detector, it can pick up on unnatural readings of energy anywhere
What are disc brakes made of?
Depending on the car, some disc brakes are made of steel, aluminum or carbon fiber.
What is the phaistos disc made of?
they are made of island creye
When was the first Matzo made with holes?
Matzo has always been made with holes, to prevent it rising.
Who invented the laser disc?
The first commercial laser disc was made by the Philips company
Who made the first compact disc?
Inventor, James Russell made the first compact disc. He discovered this invention on the date of August, 17th, 1982. Another name for a compact disc is CD.
A cone is a solid made from a disc any point on that disc and all points between them.?
False
