answersLogoWhite

0

The two holes in the disc of an energy meter allow for the insertion of a small metal tab that causes the disc to rotate. As electricity flows through the meter, the disc spins in proportion to the amount of energy consumed, providing a visual representation of power usage to the user.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

Which material is used for construction the rotating disc in energy meter?

Typically, the rotating disc in an energy meter is made of lightweight and durable materials such as aluminum or plastic. These materials are carefully selected to ensure accurate rotation and minimal wear over time while being cost-effective for mass production.


How are white holes made and what is their role in the universe?

White holes are theoretical objects that are the opposite of black holes. They are believed to be created as a result of the mathematical equations that describe black holes, but there is no observational evidence of their existence. In theory, white holes would expel matter and energy outward, in contrast to black holes which pull matter and energy inward. Their role in the universe, if they exist, is not well understood, but some scientists speculate that they could potentially be connected to the creation of new universes or play a role in the recycling of matter and energy.


Are Flat disc capacitors made up of two flat plates separated by insulating material.?

Yes, flat disc capacitors are typically made up of two flat metallic plates separated by an insulating material, such as ceramic or plastic. These plates form a capacitor that can store and release electrical energy.


What units make up a joule and how are they related to each other?

A joule is made up of units of energy, which are related to each other through the formula: 1 joule 1 newton x 1 meter. This means that a joule is equivalent to the amount of energy required to move an object with a force of 1 newton over a distance of 1 meter.


Are black holes made up of dark matter?

Black holes are not made up of dark matter. Dark matter is a mysterious substance that makes up a large portion of the universe's mass, but black holes are formed from the collapse of massive stars.

Related Questions

Which material is used for construction the rotating disc in energy meter?

Typically, the rotating disc in an energy meter is made of lightweight and durable materials such as aluminum or plastic. These materials are carefully selected to ensure accurate rotation and minimal wear over time while being cost-effective for mass production.


Why is the rotor disc of energy meter made thin?

Aluminium is a good conductor but it is non magnetic material and therefore cannot be altered by magnetic currents and run true and hence it is preferred.


What are the various test made before the installation of energy meter?

The various tests that are made before the installation of an energy meter are completed to ensure the safety and accuracy of the meter. These tests include EMC, vibration and core meter accuracy testing.


How are white holes made and what is their role in the universe?

White holes are theoretical objects that are the opposite of black holes. They are believed to be created as a result of the mathematical equations that describe black holes, but there is no observational evidence of their existence. In theory, white holes would expel matter and energy outward, in contrast to black holes which pull matter and energy inward. Their role in the universe, if they exist, is not well understood, but some scientists speculate that they could potentially be connected to the creation of new universes or play a role in the recycling of matter and energy.


Who made the meter a meter?

me!


What are the energy and matter made in a black hole?

Black holes are hidden behind an even horizon we do not know what happen in side them.


Working of single phase energy meter?

An electric meter or energy meter is a device that measures the amount of electrical energy supplied to or produced by a residence, business or machine.The most common type is a kilowatt hour meter. When used in electricity retailing, the utilities record the values measured by these meters to generate an invoice for the electricity. They may also record other variables including the time when the electricity was used.Modern electricity meters operate by continuously measuring the instantaneous voltage (volts) and current (amperes) and finding the product of these to give instantaneous electrical power (watts) which is then integrated against time to give energy used (joules, kilowatt-hours etc). The meters fall into two basic categories, electromechanical and electronic.Electromechanical metersThe most common type of electricity meter is the Thomson or electromechanical induction watt-hour meter, invented by Elihu Thomson in 1888.[1][2]Technology The electromechanical induction meter operates by counting the revolutions of an aluminum disc which is made to rotate at a speed proportional to the power. The number of revolutions is thus proportional to the energy usage. It consumes a small amount of power, typically around 2 watts.The metallic disc is acted upon by two coils. One coil is connected in such a way that it produces a magnetic flux in proportion to the voltage and the other produces a magnetic flux in proportion to the current. The field of the voltage coil is delayed by 90 degrees using a lag coil. [1]This produces eddy currents in the disc and the effect is such that a force is exerted on the disc in proportion to the product of the instantaneous current and voltage. A permanent magnet exerts an opposing force proportional to the speed of rotation of the disc - this acts as a brake which causes the disc to stop spinning when power stops being drawn rather than allowing it to spin faster and faster. This causes the disc to rotate at a speed proportional to the power being used.The type of meter described above is used on a single-phase AC supply. Different phase configurations use additional voltage and current coils.ReadingThe aluminum disc is supported by a spindle which has a worm gear which drives the register. The register is a series of dials which record the amount of energy used. The dials may be of the cyclometer type, an odometer-like display that is easy to read where for each dial a single digit is shown through a window in the face of the meter, or of the pointer type where a pointer indicates each digit. It should be noted that with the dial pointer type, adjacent pointers generally rotate in opposite directions due to the gearing mechanism.The amount of energy represented by one revolution of the disc is denoted by the symbol Kh which is given in units of watt-hours per revolution. The value 7.2 is commonly seen. Using the value of Kh, one can determine their power consumption at any given time by timing the disc with a stopwatch. If the time in seconds taken by the disc to complete one revolution is t, then the power in watts is . For example, if Kh = 7.2, as above, and one revolution took place in 14.4 seconds, the power is 1800 watts. This method can be used to determine the power consumption of household devices by switching them on one by one.Most domestic electricity meters must be read manually, whether by a representative of the power company or by the customer. Where the customer reads the meter, the reading may be supplied to the power company by telephone, post or over the internet. The electricity company will normally require a visit by a company representative at least annually in order to verify customer-supplied readings and to make a basic safety check of the meter.AccuracyIn an induction type meter, creep is a phenomenon that can adversely affect accuracy, that occurs when the meter disc rotates continuously with potential applied and the load terminals open circuited. A test for error due to creep is called a creep test.


What are disc brakes made of?

Depending on the car, some disc brakes are made of steel, aluminum or carbon fiber.


What is the phaistos disc made of?

they are made of island creye


When was the first Matzo made with holes?

Matzo has always been made with holes, to prevent it rising.


Are Flat disc capacitors made up of two flat plates separated by insulating material.?

Yes, flat disc capacitors are typically made up of two flat metallic plates separated by an insulating material, such as ceramic or plastic. These plates form a capacitor that can store and release electrical energy.


Who made the first compact disc?

Inventor, James Russell made the first compact disc. He discovered this invention on the date of August, 17th, 1982. Another name for a compact disc is CD.