To allow a system to access two separate networks.
The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.The same as a public IP. Your choices are: (1) assign an address manually, and (2) configure the computer to get an IP address automatically from a DHCP server.
In hte properties of the Local Area Connection, choose Advanced. You can add a secondary IP address there. Note: Acording to my knowledge that is not possible.
No because the IP should be a unequal number to other computers. If 2 machines are the same IP, you will not be able to access the internet.
1. DHCP server 2.Static assignment 3 manual dhcp
Nic Roewert is 6' 2".
Scottie Nic is 6' 2".
You have to have 2 network cards in the computer. I can not thing of any other way of doing something like that. Why would you need 2 address for a computer anyways?
To determine if Computer 1 and Computer 2 belong to the same subnet, you need to compare their IP addresses and subnet masks. If the network portion of their IP addresses, as defined by the subnet mask, matches, then they are in the same subnet. For instance, if Computer 1 has an IP address of 192.168.1.10 with a subnet mask of 255.255.255.0, and Computer 2 has an IP address of 192.168.1.20 with the same subnet mask, they are in the same subnet. If the network portions differ, they belong to different subnets.
Answer: No, two hosts/nodes on the same network, or subnet cannot share the same IP Address. This goes for everything with a NIC, or (network interface card), including IP Printers.Why?: Simply put, two hosts/nodes on the same network, or subnet cannot use the same logical addressing information. This would cause logical addressing errors during ARP, RARP, DHCP and DNS traffic (among many others), and prevent both machines from using the network at the same time, due to 'half of all packet transmissions' being sent, or received at any given point by one host/node, but never the other.
Nic Bernasconi is 5' 7 1/2".
To avoid conflicts with preassigned devices, you could typically assign IRQs 10 and 11 to a Network Interface Card (NIC). These IRQs are often available for use in modern systems, as many standard devices are assigned IRQs 1 through 9 or 12 through 15. However, it's always best to check the specific hardware configuration and the system's IRQ routing table to ensure there are no conflicts.
Ip Conflict