Generally, bolts are harder than other parts of the lock to resist sawing. Some bolts have a hardened pin at the center of the bolt, that rotates if anyone tries to cut through the bolt.
Torquing head bolts without a torque angle meter is substantially harder than with one but it is very much possible. All it requires is keeping a steady hand and a keen eye on your work.
The torsion bars on a 1999 4x4 Chevy Suburban are adjusted by turning the adjustment bolts. They allow the vehicle to be moved up or down as needed.
if the exhaust pipe is in the way it will be a little harder ,a first timer can accomplish this feat in a bout 1 hour . i believe there are 6 bolts and it comes right out,after the lines are disconnected.
In what context: harder as in metals, or harder as in difficult?
Birch is much harder.
The opposite of "easier" is "harder."
it runs off serp belt. its toward yhr ft. there 3 bolts holding pully to pump. not much harder than taking belt off.
No. Harder is an Adverb.
Try harder can be the other way to replace work harder, too.
me then you my cuchie and while i suck your kiss me harder harder and harder
more harder <><><> Neither is correct. There is hard and harder or hardest. There is no "more hard".
No Topaz is harder.