Want this question answered?
-- a power supply -- a load -- low-resistance material to connect the load to the power supply
Power use of an electrical appliance is calculated by finding its rating in watts. The formula is W = I x E. Watts = Amps x Volts. <<>> Power is a general term. If you want to know how much you pay to power a certain appliance you need to figure out the amperage of the appliance, (usually located on the appliance itself or in the instructions). Power companies use kilowatt hours to charge you for electricity, to figure out how many kilowatt hours your appliance uses you would need to multiply the amperage your appliance uses by .115 and that would give you the kilowatts it is using. Then you would multiply that by how many hours you use said appliance and then multiply by your cost per kilowatt hour, (found on your electric bill).
Its resistance.
what is the power rating of energy
Yes, either way, the power is cut to that appliance.
you dont
Please ensure power cord is plugged in to Active power source before trying to switch on appliance
take a solar panel & add wires on the panel & connect these wires to the small appliance!!!!
a power source, a resistor and wiring to connect them.
-- a power supply -- a load -- low-resistance material to connect the load to the power supply
Power connectors are part of electrical devices that let you connect power to different sources of electronics. They connect power from a main source of electricity to various parts of technological devices.
The fans usually connect to the motherboard, but they can connect directly to the power supply unit.
If you take a power source like a dc battery or AC transformer secondary winding and connect an ammeter directly across these power sources you can read the short circuit current available from that source. This gives a measure of internal resistance of the battery or the available wattage of the transformer.
A source of power, a load, and some wire to connect them together.
UPS (uninterruptible power supply)
The power source, the thing it's turning on, and the wire to connect the power to the thing.
Lamps use what is called a power cord. Power cords connect the appliance (in this case, a lamp) to a wall socket and the electrical field causes the filiment in the light bulb to beam.