Some fluorescent lamps (bulbs) can be dimmed, but they must be designed to be dimmable. The ballasts and electronics that drive the bulb have to be designed to work with a dimmer or they will not function properly and may overheat.
When dimming fluorescent bulbs, many can't be faded smoothly from full to zero. Some will only go to a minimum like 5-20%.
A dimmable compact fluorescent lamp will be labelled as being dimmble and can be connected to an ordinary dimmer. For tubes, the ballast has to be specailly designed to be dimmable.
Incandescent can be used with a dimer switch. Flourscent lamps, unless designed to be dimmable, cannot due to the ballast needed.
They Are Dim Because the d-cell being used does not produce enough energy to light them both
They were very dim, bare, and clear. They burned out fast.
A: There is no such a thing as simple circuit if the bulbs are put in series the light will dim if put in parallel both bulbs will light up the same provided the source can sustain the power increase
Q-banding: The pattern of bright and dim fluorescent crossbands seen on chromosomes under ultraviolet light after quinacrine mustard staining.
you can not put a normal dimmer on a florescent light. You need to install a dimmer made for flourecent lights and they are expensive about 50 dollar around here. If you want to dim it put a normal incandescent bulb in the fixture.
You need to purchase a Fluorescent dimmer switch, no circuit can dim the brightness of the light safely.
They Are Dim Because the d-cell being used does not produce enough energy to light them both
Yes, also you could try a lower wattage lamp that will still fit into the same fluorescent fixture.
They were very dim, bare, and clear. They burned out fast.
They Are Dim Because the d-cell being used does not produce enough energy to light them both
They Are Dim Because the d-cell being used does not produce enough energy to light them both
A: There is no such a thing as simple circuit if the bulbs are put in series the light will dim if put in parallel both bulbs will light up the same provided the source can sustain the power increase
No...
They Are Dim Because the d-cell being used does not produce enough energy to light them both
Use pink light bulbs they will make you look prettier. Use blue light bulbs to make soft light. If you have a lamp, drape a scarf over it to dim the light. Install a dimmer switch to adjust the lighting.
All bulbs will dim over time and then eventually go out. See the Sources and Related Links section below to lookup light bulb info.
Over time, the heat produced causes the filament to grow thinner. This causes the light bulb to grow dim.