A Salt Chlorinator works by a small electric charge that breaks down the salt before going into the pool.. Thus making chlorine. (in a nut shell) A chlorinator you put tabs in just has water flowing through it breaking down the chlorine tabs and expelling it into the water. For a totally green pool that is algea, chemical, stain and scum line resistant. use a product called "ARMOR GUARD" it will save you about 50% on chemicals and will hold about 40% more heat in your pool. read more at www.ecosmartalternative.com for more information.
A fresh water swimming pool is a swimming pool that does not use a saltwater chlorinator. A pool that used a salt water chlorinator has salt added to it to so that a salt water chlorinator can electronically convert part of the salt into chlorine. A fresh water pool has chlorine added to it directly either manually or Automatically.
Yes as a mater of fact that is what salt water pool normally is. With a salt water pool there is a electronic salt water chlorinator installed that uses the salt in the water to create chlorine. However if you don't have a salt water chlorinator and prefer the feeling of a salt water pool then there is no reason not to add salt to the pool as well as keeping up the chlorine yourself.
Salt is put into swimming pools so that the water from the pool can be run through a salt water chlorinator which produces chlorine to disinfect the pools water.
Salt is put into Swimming Pools so that the water from the pool can be run through a salt water chlorinator which produces chlorine to disinfect the pools water.
The chemicals in the pool, normally chlorine or salt water chlorinator. It has the same effect as household bleach. An ozonator would eliminate the use of chemicals.
The same as any other pool.
To detect chlorine leaks around a chlorinator, you can use a chlorine leak detector that is specifically designed to detect chlorine gas. These detectors typically monitor the air for chlorine levels and can alert you if there is a leak. It's important to regularly inspect the equipment and conduct maintenance to ensure there are no leaks.
There will no issues with the water pump. Most pools don't really use salt water they put salt in the water and have a chlorinator that zaps the salt turning it into Chlorine. Salt is a bit hard on gas heaters though. I like to use heat pumps made out of titanium when I have salt systems in the water.
Bromine is an additive that you put in a pool to sanitize the water. Chlorine is an additive that you put in a pool to sanitize the water. Salt is added to some pools to allow it to be converted electronically to chlorine with a salt water chlorinator.
Yes, as long as you use a de-chlorinator, this can safely be done. Make sure the de-chlorinator destroys both chlorine and chloramines- many only remove one of the two. If you can find a de-chlorinator that also destroys ammonia, than that is an added bonus as it will come in handy when dealing with ammonia spikes when cycling an aquarium.
That depends on the Chlorinator you intend to use and the size of the pool it would be wise to seek advise from the manufacturer of the chlorinator or the outlet from which you bought it. Saltwater pools use dissolved salt (3000-6000 ppm
Free chlorine is the sanitizing portion of chlorine. You may not want to reduce that. Are the levels excessive? There is a product which reduces or eliminates chlorine but beware. Not a good product if you use too much. What are your readings?