When lightning disturbance directly strikes on transformer terminal and flashover occur forming chopped wave. To confirm this situation, Chopped wave needed.
Mahendra Soni
Sudden rise in Voltage is called Impulse voltage.
Lightning impulse withstand voltage
BIL is basic insulation level as per you or in other words it would be "basic impulse level" which implies the limit up to which an insulator could withstand impulse due to lightning strikes. Impulse is generated on the insulation due to the high voltage surges and spikes due to lightning strikes. BIL is generally much higher as compared to power frequency withstand voltage. In other words BIL is lightning Impulse withstand voltage. Impulse withstand voltage is the voltage that is generated due to switching operation and it's much higher than power frequency withstand, but BIL or the lightning withstand voltage is a the voltage level that an insulation can withstand during surge or lightning strikes.
The lightning phenomena is occurred on transmission lines or sub-stations due to which a negative wave is generated hence definitely destroy the power apparatus. So for impulse voltage testing of any power apparatus one must produce a negative impulse.
That is the voltage rating the product can stand up to. If the lightning withstand voltage was 100,000,000V, that means the item could get struck by lightning that is up to 100,000,000V without damaging it.
Simply, the voltage which is withstand by the test object as an impulse is called as rated impulse voltage.
Sudden rise in Voltage is called Impulse voltage.
csACaca
Lightning impulse withstand voltage
BIL is basic insulation level as per you or in other words it would be "basic impulse level" which implies the limit up to which an insulator could withstand impulse due to lightning strikes. Impulse is generated on the insulation due to the high voltage surges and spikes due to lightning strikes. BIL is generally much higher as compared to power frequency withstand voltage. In other words BIL is lightning Impulse withstand voltage. Impulse withstand voltage is the voltage that is generated due to switching operation and it's much higher than power frequency withstand, but BIL or the lightning withstand voltage is a the voltage level that an insulation can withstand during surge or lightning strikes.
the voltage will be decreased
This is the peak voltage for a 50% probability of flashover or disruptive charge.
The lightning phenomena is occurred on transmission lines or sub-stations due to which a negative wave is generated hence definitely destroy the power apparatus. So for impulse voltage testing of any power apparatus one must produce a negative impulse.
The distance between high voltage lines is governed by either a switching impulse voltage or lightning impulse voltage. The distance between lines, or lines and tower must have a high enough dielectric strength to avoid flashover at these voltage. Air can withstand a voltage of 3kv/mm.
Basic Impulse Level...
impulse generator equation is a difference of two exponential functions V0 = Vs/k (exp-at - exp-bt)
Yes, an action potential is needed for a nerve impulse to occur.