I consider that this preference is only illusory.
Dilute sulfuric acid is preferred over dilute HCl for testing anions because it can help differentiate between chloride ions and sulfate ions by forming precipitates with certain anions. Sulfuric acid also provides a stronger acid environment for reactions, allowing for more distinct precipitation reactions to occur during the testing process.
One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.
Hydrogen gas is produced when nickel reacts with dilute sulphuric acid according to the reaction: Ni + H2SO4 -> NiSO4 + H2.
below pH 6.8above pH 8.26.8 yellow↔8.2 purple
No, mercury is a chemical element, and sulfuric acid is a different chemical compound. Mercury is a metal that is liquid at room temperature, while sulfuric acid is a strong mineral acid commonly used in various industries.
To prepare 0.25N sulphuric acid from 2N sulphuric acid, you can dilute the 2N solution by adding 7 parts of water to 1 part of the 2N solution. This will result in a final 0.25N sulphuric acid solution.
H2SO4(dilute)
Dilute sulphuric acid is an aqueous solution, formed by adding water to sulphuric acid, resulting in a homogeneous mixture.
the answer is dilute sulphuric acid... thats what everyone says
One way to convert dilute sulphuric acid to concentrated sulphuric acid is through a process called evaporation. In this method, the dilute acid is heated to evaporate the water content, leaving behind the concentrated acid. Another method involves adding concentrated sulphuric acid to the dilute solution until the desired concentration is achieved.
irritant
Copper does not react with dilute Sulphuric acid.
dicks
Dilute sulfuric acid is still acid. It is NOT basic at all.
Dilute sulphuric acid
Hydrogen gas is produced when nickel reacts with dilute sulphuric acid according to the reaction: Ni + H2SO4 -> NiSO4 + H2.
Yes, it is dilute sulphuric acid.
Sulphuric acid