Make sure all bulbs are working Most likely a bad turn signal flasher
Check fuse, bulbs, and flasher relay.
2000 rmp
If the turn signals are inoperative check the hazard switch, if the hazards don't work replace the hazard switch, the signals will start working. if the hazards are ok ,the turn signal switch may be bad.
If the turn signals are not working properly on a 2002 Chevy Venture and the fuses seem to be alright, check for burned out bulbs in the turn signals. Also, check to make sure the turn signal flasher is working properly.
your timing is not set right
On my 2002 Passat the hazards and the turn signals all operate through the same flasher unit that operats the hazards. This is behind the hazard switch. See related questions for removal details.
If your 2000 Lincoln has turn signals that don't work, first check to see if the bulbs are working. Then, see if there is fuse that has blown that affects the turn signals.
If the turn signals and emergency signals don't workout sounds like an electrical problem's would suggest that you take it into the closest shop to get the problem diagnosed properly.
theyre orange
Your turn signals may not be blinking properly because something may be wrong with the wiring or fuses. Take your Harley to an authorized dealer to have diagnostic testing done.
If the turn signals in the dash don't work, what about the outside front and rear turn signals? Working? Not working? If it's not working, replace the turn signal relay under the dash.
It's right behind the hazzard button, you must pry the button out for access.