0
You can go either way. If you use stranded wire, you're pulling it through conduit. Stranded wire is more flexible, so it's easier to pull through the conduit. Solid wire stays bent once you bend it, and a stray wire won't jump out of a solid conductor and cause a short. Industrial wiring is a different story: all industrial wire is in conduit, so it's all stranded. Wiring with conduit is too expensive for residential applications, so they use Romex--which is always solid wire.
Wiki User
∙ 15y ago
Wiki User
∙ 14y agoMost of the times when thin wires are used in circuits, the voltage is of small values and the current draws are low. The resistance of the small wire is used in the design of the circuit to make that circuit operate. You will see in electrical installation instructions that you can only use a certain length of wire and size to make the circuit operate within the specifications of the manufacturer.
Add your answer:
Earn +20 pts
Should use thick or thin wire in an electric fuse?
Every fuse is rated for some certain current. The rating is the maximum currentthat can flow through the fuse before the wire in it gets so hot that it melts andopens the circuit. (In the arcane jargon of the high-tech world of engineering,especially electrical, this event is described by saying that the fuse "blew".)The thinner the wire is, the less current it can conduct before the wire melts.The thicker the wire is, the more current it can carry before the wire melts.So, the wire you select for your fuse completely depends on the current forwhich you want to rate your fuse, and above which you want it to "blow".
What is the correct use The wire is too thick or the wire is to thick?
too. To indicates direction. I'm going to the bathroom. Too emphasizes something. Too thick, too fast, too big.
Why is copper used in fuses?
Copper is used in the contact points in fuse boxes because it will oxidize and you can separate the points of contact. If it was made if iron and rusted, it will 'weld' the link together and then it is no longer a fuse.
How does a fuse break?
A fuse is a piece of wire that has a lower current rating than the rest of the circuit. When power is applied to a wire, it heats up (which is why electrical items get hot with use). The fuse wire melts at a lower temperature than the rest of the circuit - meaning that it breaks before the device is damaged by high current.
What number wire gauge for a single pole light switch?
In residential wiring applications the most used is 14 gauge wire for light switches as long as the circuit breaker or the fuse is 15A. If your lighting circuit is on a 20A fuse/circuit breaker then you need to use 12 gauge wire
Should use thick or thin wire in an electric fuse?
Every fuse is rated for some certain current. The rating is the maximum currentthat can flow through the fuse before the wire in it gets so hot that it melts andopens the circuit. (In the arcane jargon of the high-tech world of engineering,especially electrical, this event is described by saying that the fuse "blew".)The thinner the wire is, the less current it can conduct before the wire melts.The thicker the wire is, the more current it can carry before the wire melts.So, the wire you select for your fuse completely depends on the current forwhich you want to rate your fuse, and above which you want it to "blow".
Will a short thick metal wire have better resistance compared to a long narrow metal wire?
"Better" depends on how much resistance you need for your circuit design.A short thick wire will have less resistance than a long thin wire of the same substance.Whether that's better or worse depends on how you plan to use the wire.
What is meant by Horn Gap Fuse?
horn gap fuse is a protective device which use to protect the equipment from higher voltage.actually horn fuse or horn gap fuse is a thin wire element as compare to load line when a high current drawn in line the wire is melt and line protect.
How do you know if fuses are blown?
in a vehicle if fuses are blown a light comes on on your dash board . the light will indicate exactly what part , controlled by the fuse is affected. look at the fuse box it should have written on the face cover a guide to all fuses. pull out the fuse......inside is a thin wire ....if the wire is broken the fuse is no good. however in an emergency you can use a thin piece of wire , probably taken from your stereo speakers,use no more than three strands, and wrap it around the metal points of the fuse connecting both metal points and reinsert into the fuse holder . remember this is for emergencies only and is a short term solution. hope i have helped
Why freezers use thin or thick wires?
because
Is it better to use thin wires or thick ones?
I think thick wires are smarter
Why you use fuse in circuits?
A fuse is a piece of thin wire in a small fireproof container, and current flows through it on the way to the appliance. If there is a fault in the appliance and too much current starts to flow, the fuse-wire melts and stops the current, and it stops any possible fire that the excess current could cause. So a fuse is an important safety device.
Why the thin wire has grater resistance to electricity?
it has to do with ohms and the gauge of the wire. if you have a low ohms then you can't use a small thin wire. because the more ohms the more resistance. if you have a low omhs on a thin wire it can cause the wire to heat up. posibly catch fire.
Why are some paper towels thick and some are thin?
The reason some paper towels are thick and some are thin is because it might use a lot of trees to make it.
Size fuse for 12 AWG wire?
Use a 20 amp fuse or breaker.
What is the correct use The wire is too thick or the wire is to thick?
too. To indicates direction. I'm going to the bathroom. Too emphasizes something. Too thick, too fast, too big.
What did AbuTalib use to say about prophet Muhammad?
He stood by him through thick and thin.
