answersLogoWhite

0

Because the circuit board shorts out. Get a new one from the parts store they are less than $40 per side

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

1999 Chevy venture radio lights flicker when you apply the brakes?

there is a circuit board inside each tail light assy that is shorting out --- common problem on the venture. pretty soon the light will quit completely. around $35 for each side for the bulb sockets and board


Why wont rear lights work on Chevy venture?

There is a circuit board inside each light that usually shorts out. They cost around $30 each. The bulb attaches to the board


Why did the turn signal speed up on 2003 Chevy Venture?

it speeds up to let you know there is a bulb burned out or the circuit board is fried in the tail light lens


What causes Turn signals light up when brake pedal pushed on 2001 venture?

common problem on the Chevy venture, there is a bad circuit board inside the tail light lens on each side. the bulbs plug into it and it costs about $35 each to replace, unless you want oem, then around $120 each.


Why does blinker on passenger side of 1998 Chevy 2500 not work?

The rear tail light assembly had problems with the sockets and circuit board. My guess is you will need to replace the socket and circuit board assembly for the passenger side rear tail light.


Is their iron in a mobile phone?

No, no parts of cell phones or mobile phones are made of iron. The metals used in these phones are:Aluminium (covers, frames, battery, circuit board.)Antimony (covers)Barium (circuit board)Beryllium (connectors)Cobalt (lithium-ion batteries)Copper (circuit boards, wires, connectors, batteries)Chromium (cover, case)Gallium (LED light)Gold (electronic parts, connectors, circuit board)Indium (screen)Lead (circuit board)Manganese (circuit board, case)Nickel (battery)Palladium (circuit board)Platinum (circuit board)Ruthenium (circuit board)Silver (circuit board)Iron is heavy, gets warm quickly and reacts with moisture in the air leading to rust, so iron is not a suitable metal for a phone.


Does 2002 dodge 1500 have circuit board in the taillight?

yes the taillight does in fact have a cicuit board. Once you take off the two bolts to remove the entire fixture the circuit board is the long plastic piece with the 4 screws holding in your 3 light bulbs


Why is the battery light on the dash board panel light up when the air con is on?

I would imagine that there is a short circuit or a Parasitic drain on air con circuit. Often air con is ran automatically and wiring would be linked to ignition circuit. SDS


What would cause only right tail light not to work?

A circuit board error. Probably disconnected or obstructed.


What would cause breaklights and taillights to keep burning out on a 2002 Chevy venture?

Hi,The tail light socket boards in these vans are well known for having problems.If you have a water leak that is getting into the tail light assembly, that will often cause a short circuit across the "circuit board" and socket assembly that is inside the tail light assembly.What I would recommend it taking the assembly apart and CAREFULLY examining the board and the sockets. Sometimes you will find that there is a partly melted socket, or some other burned component on the board. If you find that condition, you can either try to repair it (if you are good with that kind of thing) or just replace it. You will find many of these circuit board assemblies for sale at auto parts stores, or on line at places like eBay. You might want to consider replacing both boards are the same time if both sides are burning out.Take Care, Greg


After replacing the fuses bulbs and brake light switch the tail and brake lights work and then fuse blows 97 Chevy PU?

If memory serves me right, each tail light assembly has a printed circuit board that the bulbs plug into. That circuit board burns out. That part is available from the Chevy dealer.


How do you replace rear lights in a 1997 VW Golf?

Working from inside the car, pull the cloth back from behind the light housing to expose a bunch of wires and a plastic circuit board. Circuit board is held on by a couple finger clips. Squeeze clips, gently pull on board and the whole works will come out. It will look like a circuit board with light bulbs in various locations. Press and turn to free your burnt out bulb. Take the bulb with you when you get a new one. No tools necessary.