Because - the computer needs a specific set of instructions to start -up. The instructions held in ROM initialise the hardware and instruct the computer to load the operating system (and where to find it on the hard-drive).
RAM can't hold such instructions. Most programs are stored on a hard disk or similar, and that includes most of the startup instructions for the operating system. But the computer needs SOME initial instructions, to load the operating system, which includes copying it from hard disk or similar, to RAM.
In a refrigerator which has a motherboard,ROM stores its configurations and instructions such as power timings and stoppage of compressor and starting of fans .RAM can store the instructions given by the user such as controlling the defrosting of refrigerator ie teh temperature controlling system.a
Information stored in RAM can be accessed far faster than information stored in ROM. Thus, a computer might store its boot-up instructions in ROM, but store program files in RAM after initial boot-up.
RAM
no
ROM stands for Read only memory. Its not extra on your computer. Operating System cannot load into Ram from hard disk without help of Rom. Rom contains instructions which are used to start a computer
Yes ROM is the memory that holds everything that tells your computer how to actually start up.
Rom bios
Off ROM (Read Only Memory) is typically used to write permanent data or instructions to a system for use even after the computer is turned off. Examples of ROM are your BIOS and Firmware
ROM (read-only memory) chips are installed on a computer's motherboard. The model of the board usually determines the type of ROM needed to control a computer's boot routine. ROM is often called "nonvolatile memory," meaning that an electrical current is not needed to maintain the prerecorded data instructions on the chip. The instructions cannot be overwritten, and only special equipment can be used to rewrite or erase the data
Read Only Memory can be found on computer hardware like motherboards and processors. ROM is used to store data that does not to be changed in the normal running of a computer.
The ROM BIOS chip stores permanent instructions. ROM means read-only memory. BIOS means basic input/output system, meaning the very basic instructions needed to power up the computer. From there, the operating system loads.
ROM!