Want this question answered?
In ten hours, a 200W bulb will use: 10 * 200 = 2000 Watt-hours = 2 kwh
Halogen bulbs generate a lot of heat and for that reason the power (watts) is limited, to prevent a fire hazard. Each light fitting should be marked with a power limit which should be observed. Without additional information a 300 w bulb should not be put in a fiiting that previously had a 230 w bulb.
Halogen gas is in a Tungsten-Halogen Light Bulb.
No. The heat from the larger bulb will damage the socket, and is a fire hazard.
No, not directly. You can buy Halogen bulbs that are made to be used in a standard light socket. They are for sale at the standard outlets. I have a number of these in my house, and I use these in some of my light sockets. Just for you information I have one in my lap as I am typing this it is a Philips Master 120 Volts 60 Watt bulb. The only condition is that you have to get a specific bulb for dimmer circuits, a standard halogen does not work with dimmers. The bulbs have ceramic insulator protecting a balast circuit, the dimmer bulbs have a rather large ceramic end, that is sometimes enclosed inside the standard light globe. All the standard bulb manufacturers should sell these. You just cannot use Halogen bulbs in enclosed lights unless they are made for this purpose, as is the dimmer variant I wrote about.
In ten hours, a 200W bulb will use: 10 * 200 = 2000 Watt-hours = 2 kwh
Halogen bulbs generate a lot of heat and for that reason the power (watts) is limited, to prevent a fire hazard. Each light fitting should be marked with a power limit which should be observed. Without additional information a 300 w bulb should not be put in a fiiting that previously had a 230 w bulb.
No, it's just the standard halogen bulb. Len
Halogen gas is in a Tungsten-Halogen Light Bulb.
A jdr is a type of halogen light bulb. These bulbs have a screw in base, that is one size smaller than a standard household base.Ê
No. The heat from the larger bulb will damage the socket, and is a fire hazard.
yes you can
Halogen bulbs have filament like standard incandescent bulbs. When unused, the filament will appear silvery and clean. After use the filament may discolour.
No, not directly. You can buy Halogen bulbs that are made to be used in a standard light socket. They are for sale at the standard outlets. I have a number of these in my house, and I use these in some of my light sockets. Just for you information I have one in my lap as I am typing this it is a Philips Master 120 Volts 60 Watt bulb. The only condition is that you have to get a specific bulb for dimmer circuits, a standard halogen does not work with dimmers. The bulbs have ceramic insulator protecting a balast circuit, the dimmer bulbs have a rather large ceramic end, that is sometimes enclosed inside the standard light globe. All the standard bulb manufacturers should sell these. You just cannot use Halogen bulbs in enclosed lights unless they are made for this purpose, as is the dimmer variant I wrote about.
Yes. It just won't be as bright.
Your local auto parts store can sell you halogen bulbs that can replace the standard bulb in your vehicle. The procedure is a little different from one vehicle to the next but is relatively easy to do.
It is a double ended halogen bulb and I do not know how to get to it to release it from the lamp.